Re: [PATCH] dt-bindings: riscv: fix SiFive l2-cache's cache-sets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 03 Aug 2022 11:54:00 PDT (-0700), mail@xxxxxxxxxxx wrote:
From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>

Fix device tree schema validation error messages for the SiFive
Unmatched: ' cache-sets:0:0: 1024 was expected'.

The existing bindings allow for just 1024 cache-sets but the fu740 on
Unmatched the has 2048 cache-sets. The ISA itself permits any arbitrary
power of two, however this is not supported by dt-schema. The RTL for
the IP, to which the number of cache-sets is a tunable parameter, has
been released publicly so speculatively adding a small number of
"reasonable" values seems unwise also.

Instead, as the binding only supports two distinct controllers: add 2048
and explicitly lock it to the fu740's l2 cache while limiting 1024 to
the l2 cache on the fu540.

Fixes: af951c3a113b ("dt-bindings: riscv: Update l2 cache DT documentation to add support for SiFive FU740")
Reported-by: Atul Khare <atulkhare@xxxxxxxxxxxx>
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
I split this off from the existing series as there is no dependancy
between this cache change and the gpio patch. The prior series can
be found at:
https://lore.kernel.org/all/20220726170725.3245278-2-mail@xxxxxxxxxxx/
---
 .../devicetree/bindings/riscv/sifive-l2-cache.yaml          | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
index e2d330bd4608..69cdab18d629 100644
--- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
+++ b/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml
@@ -46,7 +46,7 @@ properties:
     const: 2

   cache-sets:
-    const: 1024
+    enum: [1024, 2048]

   cache-size:
     const: 2097152
@@ -84,6 +84,8 @@ then:
       description: |
         Must contain entries for DirError, DataError and DataFail signals.
       maxItems: 3
+    cache-sets:
+      const: 1024

 else:
   properties:
@@ -91,6 +93,8 @@ else:
       description: |
         Must contain entries for DirError, DataError, DataFail, DirFail signals.
       minItems: 4
+    cache-sets:
+      const: 2048

 additionalProperties: false

Thanks, this is on for-next.



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux