On Tue, 09 Aug 2022 10:56:28 +0200, Daniel Lezcano wrote:
> When the thermal zone description was converted to yaml schema, the
> required 'trips' property was forgotten.
>
> The initial text bindings was describing:
>
> "
> [ ... ]
>
> * Thermal zone nodes
>
> The thermal zone node is the node containing all the required info
> for describing a thermal zone, including its cooling device bindings. The
> thermal zone node must contain, apart from its own properties, one sub-node
> containing trip nodes and one sub-node containing all the zone cooling maps.
>
> Required properties:
> - polling-delay: The maximum number of milliseconds to wait between polls
> Type: unsigned when checking this thermal zone.
> Size: one cell
>
> - polling-delay-passive: The maximum number of milliseconds to wait
> Type: unsigned between polls when performing passive cooling.
> Size: one cell
>
> - thermal-sensors: A list of thermal sensor phandles and sensor specifier
> Type: list of used while monitoring the thermal zone.
> phandles + sensor
> specifier
>
> - trips: A sub-node which is a container of only trip point nodes
> Type: sub-node required to describe the thermal zone.
>
> Optional property:
> - cooling-maps: A sub-node which is a container of only cooling device
> Type: sub-node map nodes, used to describe the relation between trips
> and cooling devices.
> [ ... ]
>
> "
>
> Now the schema describes:
>
> "
> [ ... ]
>
> required:
> - polling-delay
> - polling-delay-passive
> - thermal-sensors
>
> [ ... ]
> "
>
> Add the missing 'trips' property in the required properties.
>
> Fixed: 1202a442a31fd ("dt-bindings: thermal: Add yaml bindings for thermal zones")
> Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/thermal/thermal-zones.yaml | 1 +
> 1 file changed, 1 insertion(+)
>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
