[PATCH v5 3/9] iio: adc: mcp3911: use correct formula for AD conversion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The ADC conversion is actually not rail-to-rail but with a factor 1.5.
Make use of this factor when calculating actual voltage.

Fixes: 3a89b289df5d ("iio: adc: add support for mcp3911")
Signed-off-by: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
---
 drivers/iio/adc/mcp3911.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
index f8875076ae80..890af7dca62d 100644
--- a/drivers/iio/adc/mcp3911.c
+++ b/drivers/iio/adc/mcp3911.c
@@ -40,8 +40,8 @@
 #define MCP3911_CHANNEL(x)		(MCP3911_REG_CHANNEL0 + x * 3)
 #define MCP3911_OFFCAL(x)		(MCP3911_REG_OFFCAL_CH0 + x * 6)
 
-/* Internal voltage reference in uV */
-#define MCP3911_INT_VREF_UV		1200000
+/* Internal voltage reference in mV */
+#define MCP3911_INT_VREF_MV		1200
 
 #define MCP3911_REG_READ(reg, id)	((((reg) << 1) | ((id) << 5) | (1 << 0)) & 0xff)
 #define MCP3911_REG_WRITE(reg, id)	((((reg) << 1) | ((id) << 5) | (0 << 0)) & 0xff)
@@ -139,11 +139,18 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
 
 			*val = ret / 1000;
 		} else {
-			*val = MCP3911_INT_VREF_UV;
+			*val = MCP3911_INT_VREF_MV;
 		}
 
-		*val2 = 24;
-		ret = IIO_VAL_FRACTIONAL_LOG2;
+		/*
+		 * For 24bit Conversion
+		 * Raw = ((Voltage)/(Vref) * 2^23 * Gain * 1.5
+		 * Voltage = Raw * (Vref)/(2^23 * Gain * 1.5)
+		 */
+
+		/* val2 = (2^23 * 1.5) */
+		*val2 = 12582912;
+		ret = IIO_VAL_FRACTIONAL;
 		break;
 	}
 
-- 
2.37.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux