Re: [PATCH v5, 0/8] Support H264 multi-core encoder on MT8195

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dear Nicolas,

Sorry for late, we have tested this change by chrome tast test before:

tast run $IP video.PlatformEncoding.v4l2_h264*

here are the average fps results:
Before:
180p: 1913
180_meet: 1935

360p: 554
360_meet: 571

720p: 159
720_meet: 189

After:
180p: 2236
180_meet: 2337

360p: 820
360_meet: 830

720p: 324
720_meet: 390

Thanks
BRs
On Fri, 2022-07-29 at 11:08 -0400, Nicolas Dufresne wrote:
> Hi Irui,
> 
> Le vendredi 29 juillet 2022 à 11:51 +0800, Irui Wang a écrit :
> > MT8195 has two H264 encoder hardware, named core0 and core1, this
> > two
> > cores can encode two input frames separately at the same time to
> > achieve
> > higher performance.
> 
> I suspect you could provide some performance numbers on that specific
> HW before
> and after your change ? This could help integrator regarding what
> type of gain
> they can expect of back-porting this feature. This is not strictly
> mandatory
> though.
> 
> > 
> > This series of patches are used to enable the two H264 encoder
> > cores,
> > the difference between encoding process before and after enable two
> > cores is just like as below:
> > As-Is: Synchronous
> > V4L2_VIDIOC_QBUF#0 --> device_run(triger encoder) --> wait encoder
> > IRQ
> > -->
> > encoding done with result --> job_finish
> > V4l2_VIDIOC_QBUF#1 --> device_run(triger encoder) --> wait encoder
> > IRQ
> > -->
> > encoding done with result --> job_finish
> > ...
> > To-Be: Asynchronous
> > V4L2_VIDIOC_QBUF#0 --> device_run(triger encoder) --> job_finish
> > ..V4l2_VIDIOC_QBUF#1 --> device_run(triger encoder) --> job_finish
> > (venc core0 may encode done here, done the encoding result to
> > client)
> > V4L2_VIDIOC_QBUF#2 --> device_run(triger encoder) --> job_finish.
> > 
> > ---
> > changes compared with v4:
> > - reabse to the newer linux media stage tree.
> > - remove "mediatek,venc-multi-core" property since sub-device can
> >   be probed by of_platform_populate api directly.
> > - some modifications for patch v4's review comments.
> > 
> > changes compared with v3:
> > - rebase to the newer linux media stage.
> > - add a capability to indicate scp firmware support multi-core.
> > - probe core0 as main device, core1 as sub-device.
> > 
> > changes compared with v2:
> > - update venc core dt-bindings, add two new properties for current
> >   usage.
> > - parse venc multi_core mode from device tree.
> > - rebase to the newer linux media stage.
> > 
> > changes compared with v1:
> > - of_platform_populate was used in place of the component
> > framework.
> > - new yaml file for venc cores.
> > - some modifications for patch v1's review comments.
> > ---
> > 
> > Irui Wang (8):
> >   dt-bindings: media: mediatek: vcodec: Adds encoder cores dt-
> > bindings
> >     for mt8195
> >   media: mediatek: vcodec: Enable venc dual core usage
> >   media: mediatek: vcodec: Refactor venc power manage function
> >   media: mediatek: vcodec: Add more extra processing for multi-core
> >     encoding
> >   media: mediatek: vcodec: Add venc power on/off function
> >   media: mediatek: vcodec: Refactor encoder clock on/off function
> >   media: mediatek: vcodec: Add multi-core encoding process
> >   media: mediatek: vcodec: Return encoding result in asynchronous
> > mode
> > 
> >  .../media/mediatek,vcodec-encoder-core.yaml   | 218
> > ++++++++++++++++
> >  .../media/mediatek,vcodec-encoder.yaml        |   1 -
> >  .../media/platform/mediatek/vcodec/Makefile   |   4 +-
> >  .../platform/mediatek/vcodec/mtk_vcodec_drv.h |  28 +-
> >  .../platform/mediatek/vcodec/mtk_vcodec_enc.c | 113 ++++++--
> >  .../platform/mediatek/vcodec/mtk_vcodec_enc.h |  11 +-
> >  .../mediatek/vcodec/mtk_vcodec_enc_drv.c      |  44 +++-
> >  .../mediatek/vcodec/mtk_vcodec_enc_hw.c       | 156 +++++++++++
> >  .../mediatek/vcodec/mtk_vcodec_enc_hw.h       |  34 +++
> >  .../mediatek/vcodec/mtk_vcodec_enc_pm.c       | 178 +++++++++++--
> >  .../mediatek/vcodec/mtk_vcodec_enc_pm.h       |  11 +-
> >  .../mediatek/vcodec/mtk_vcodec_util.c         |  19 ++
> >  .../mediatek/vcodec/mtk_vcodec_util.h         |   3 +
> >  .../mediatek/vcodec/venc/venc_h264_if.c       | 243
> > ++++++++++++++----
> >  .../mediatek/vcodec/venc/venc_vp8_if.c        |   3 +-
> >  .../platform/mediatek/vcodec/venc_drv_if.c    |  75 ++++--
> >  .../platform/mediatek/vcodec/venc_drv_if.h    |   6 +
> >  .../platform/mediatek/vcodec/venc_vpu_if.c    |   9 +-
> >  .../platform/mediatek/vcodec/venc_vpu_if.h    |   3 +-
> >  19 files changed, 1028 insertions(+), 131 deletions(-)
> >  create mode 100644
> > Documentation/devicetree/bindings/media/mediatek,vcodec-encoder-
> > core.yaml
> >  create mode 100644
> > drivers/media/platform/mediatek/vcodec/mtk_vcodec_enc_hw.c
> >  create mode 100644
> > drivers/media/platform/mediatek/vcodec/mtk_vcodec_enc_hw.h
> > 
> 
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux