Hi,
On Wed, Aug 03, 2022 at 05:23:57PM +0800, Allen-KH Cheng wrote:
> Hi Chen-Yu and Mathias,
>
> Sincere apologies for the delayed response.
>
> On Tue, 2022-08-02 at 13:04 +0200, Matthias Brugger wrote:
> >
> > On 01/08/2022 11:29, Chen-Yu Tsai wrote:
> > > On Thu, Jul 21, 2022 at 10:50 AM Allen-KH Cheng
> > > <allen-kh.cheng@xxxxxxxxxxxx> wrote:
> > > >
> > > > The watchdog timer of mt8186. mt8195 and mt7986 have their DT
> > > > data.
> > > > We should not use 'mediatek,mt6589-wdt' as fallback.
> > > >
> > > > For mediatek,wdt example of mt8183, We remove mediatek,mt6589-wdt
> > > > fallback.
> > >
> > > I think this needs some more information.
> > >
> > > Right now on the kernel side, mt6589-wdt provides just watchdog
> > > support.
> > > The SoC-specific compatibles that are touched by this patch provide
> > > reset
> > > controls in addition to the standard watchdog, which remains the
> > > same.
> > >
> > > If that is the case, then the fallback compatibles are correct. A
> > > fallback
> > > says that the new hardware is compatible with some older hardware,
> > > and
> > > can be run with the driver supporting that older hardware, likely
> > > with
> > > reduced functionality.
> > >
> >
> > My understanding is, that we add a fallback because although at the
> > time we
> > entered the compatible, the functionality of the device is the same
> > as the
> > fallback. Nonetheless we add a compatible specific for the device in
> > case in the
> > future we realize that the device has some functionality that is not
> > and can not
> > be covered by the fallback.
> >
> > This is the case here. Actually adding the fallback in the first
> > place was
> > wrong, because the driver since ever supports the extra function for
> > the device,
> > the reset.
> >
> > So this is a mere cleanup of the binding to reflect what was always
> > present in
> > the driver.
> >
> > Regards,
> > Matthias
> >
>
> mt6589-wdt dosen't contains a reset control for other modules, like
> chen-yu mention "mt6589-wdt provides just watchdog support."
>
> For instance, there is a reset control in mt8195-wdt and we have a DT
> data to define its reset number of TOPRGU. I thought it's better not
> use mt6589-wdt as fallback.
>
> Please let me know if this works and if you have any suggestions or
> comments.
The only practical usecase that I can think of that relies on keeping the
fallback compatibles is using the current DT with an older kernel that didn't
yet support the specific watchdog compatibles. In this case, dropping the
fallback compatibles would make the watchdog not work at all in such a kernel.
I'm not sure how relevant/common of a usecase that would be, but maybe it's
worth considering given that the advantage of removing the fallback compatible
is purely aesthetic?
Thanks,
Nícolas
>
> Thanks,
> Allen
>
> > > As an example, if mt8195-wdt is backward compatible with mt6589-
> > > wdt,
> > > then it should run as mt6589-wdt, and would just be missing new
> > > functionality, in this case the reset controls.
> > >
> > > So either mt6589-wdt also contains a reset control that is not the
> > > same
> > > as the other newer chips, or has some other functionality that the
> > > other
> > > chips contain, and justifies the removal of the fallback, or this
> > > patch
> > > is incorrect. Note that mt2701-wdt and mt762*-wdt are still listed
> > > as
> > > compatible with mt6589-wdt. So I think a better explanation is
> > > required.
> > >
> > >
> > > Regards
> > > ChenYu
> > >
> > >
> > > > Fixes:a45b408a020b("dt-bindings: watchdog: Add compatible for
> > > > MediaTek MT8186")
> > > > Fixes:b326f2c85f3d("dt-bindings: watchdog: Add compatible for
> > > > Mediatek MT8195")
> > > > Fixes:41e73feb1024("dt-bindings: watchdog: Add compatible for
> > > > Mediatek MT7986")
> > > > Fixes:f43f97a0fc0e("dt-bindings: mediatek: mt8183: Add #reset-
> > > > cells")
> > > > Signed-off-by: Allen-KH Cheng <allen-kh.cheng@xxxxxxxxxxxx>
> > > > Reviewed-by: AngeloGioacchino Del Regno <
> > > > angelogioacchino.delregno@xxxxxxxxxxxxx>
> > > > ---
> > > > Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 9
> > > > ++++-----
> > > > 1 file changed, 4 insertions(+), 5 deletions(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/watchdog/mtk-
> > > > wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> > > > index 762c62e428ef..67ef991ec4cf 100644
> > > > --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> > > > +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> > > > @@ -14,12 +14,12 @@ Required properties:
> > > > "mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
> > > > "mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
> > > > "mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629
> > > > - "mediatek,mt7986-wdt", "mediatek,mt6589-wdt": for MT7986
> > > > + "mediatek,mt7986-wdt": for MT7986
> > > > "mediatek,mt8183-wdt": for MT8183
> > > > - "mediatek,mt8186-wdt", "mediatek,mt6589-wdt": for MT8186
> > > > + "mediatek,mt8186-wdt": for MT8186
> > > > "mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
> > > > "mediatek,mt8192-wdt": for MT8192
> > > > - "mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195
> > > > + "mediatek,mt8195-wdt": for MT8195
> > > >
> > > > - reg : Specifies base physical address and size of the
> > > > registers.
> > > >
> > > > @@ -32,8 +32,7 @@ Optional properties:
> > > > Example:
> > > >
> > > > watchdog: watchdog@10007000 {
> > > > - compatible = "mediatek,mt8183-wdt",
> > > > - "mediatek,mt6589-wdt";
> > > > + compatible = "mediatek,mt8183-wdt";
> > > > mediatek,disable-extrst;
> > > > reg = <0 0x10007000 0 0x100>;
> > > > interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
> > > > --
> > > > 2.18.0
> > > >
> > > >
>
>
