A kind ping. 😊
Regards,
Shenwei
> -----Original Message-----
> From: Shenwei Wang <shenwei.wang@xxxxxxx>
> Sent: Monday, August 1, 2022 3:01 PM
> To: Rob Herring <robh+dt@xxxxxxxxxx>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@xxxxxxxxxx>; Shawn Guo <shawnguo@xxxxxxxxxx>;
> Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>; Pengutronix Kernel Team
> <kernel@xxxxxxxxxxxxxx>; Peng Fan <peng.fan@xxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; Shenwei
> Wang <shenwei.wang@xxxxxxx>
> Subject: [PATCH v5 3/3] arm64: dts: imx: add imx8dxl support
>
> i.MX8DXL is a device targeting the automotive and industrial market segments.
> The chip is designed to achieve both high performance and low power
> consumption. It has a dual (2x) Cortex-A35 processor.
>
> This patch adds the imx8dxl soc and EVK board support.
>
> Signed-off-by: Shenwei Wang <shenwei.wang@xxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi | 2 +-
> .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 138 ++++++
> .../boot/dts/freescale/imx8-ss-lsio.dtsi | 14 +
> arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 463 ++++++++++++++++++
> .../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 72 +++
> .../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 145 ++++++
> .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi | 9 +
> .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 78 +++
> arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 238 +++++++++
> 10 files changed, 1159 insertions(+), 1 deletion(-) create mode 100644
> arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile
> b/arch/arm64/boot/dts/freescale/Makefile
> index 8bf7f7ecebaa1..2741205efe84e 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-
> 85bb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-899b.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds-9999.dtb
>
> +dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb diff --git
> a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
> b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
> index 8b5cad4e27002..7d5183c6c5bef 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
> @@ -10,7 +10,7 @@ ddr_subsys: bus@5c000000 {
> #size-cells = <1>;
> ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
>
> - ddr-pmu@5c020000 {
> + ddr_pmu0: ddr-pmu@5c020000 {
> compatible = "fsl,imx8-ddr-pmu";
> reg = <0x5c020000 0x10000>;
> interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; diff --git
> a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> index 960a802b8b6ee..3944dfbdb7c9e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> @@ -60,6 +60,54 @@ lpuart3: serial@5a090000 {
> status = "disabled";
> };
>
> + spi0_lpcg: clock-controller@5a400000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5a400000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&clk IMX_SC_R_SPI_0 IMX_SC_PM_CLK_PER>,
> + <&dma_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "spi0_lpcg_clk",
> + "spi0_lpcg_ipg_clk";
> + power-domains = <&pd IMX_SC_R_SPI_0>;
> + };
> +
> + spi1_lpcg: clock-controller@5a410000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5a410000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&clk IMX_SC_R_SPI_1 IMX_SC_PM_CLK_PER>,
> + <&dma_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "spi1_lpcg_clk",
> + "spi1_lpcg_ipg_clk";
> + power-domains = <&pd IMX_SC_R_SPI_1>;
> + };
> +
> + spi2_lpcg: clock-controller@5a420000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5a420000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&clk IMX_SC_R_SPI_2 IMX_SC_PM_CLK_PER>,
> + <&dma_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "spi2_lpcg_clk",
> + "spi2_lpcg_ipg_clk";
> + power-domains = <&pd IMX_SC_R_SPI_2>;
> + };
> +
> + spi3_lpcg: clock-controller@5a430000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5a430000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&clk IMX_SC_R_SPI_3 IMX_SC_PM_CLK_PER>,
> + <&dma_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "spi3_lpcg_clk",
> + "spi3_lpcg_ipg_clk";
> + power-domains = <&pd IMX_SC_R_SPI_3>;
> + };
> +
> uart0_lpcg: clock-controller@5a460000 {
> compatible = "fsl,imx8qxp-lpcg";
> reg = <0x5a460000 0x10000>;
> @@ -108,6 +156,18 @@ uart3_lpcg: clock-controller@5a490000 {
> power-domains = <&pd IMX_SC_R_UART_3>;
> };
>
> + emvsim0_lpcg: clock-controller@5a4d0000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5a4d0000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&clk IMX_SC_R_EMVSIM_0 IMX_SC_PM_CLK_PER>,
> + <&dma_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "emvsim0_lpcg_clk",
> + "emvsim0_lpcg_ipg_clk";
> + power-domains = <&pd IMX_SC_R_EMVSIM_0>;
> + };
> +
> i2c0: i2c@5a800000 {
> reg = <0x5a800000 0x4000>;
> interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; @@ -199,4
> +259,82 @@ i2c3_lpcg: clock-controller@5ac30000 {
> "i2c3_lpcg_ipg_clk";
> power-domains = <&pd IMX_SC_R_I2C_3>;
> };
> +
> + lpspi0: spi@5a000000 {
> + compatible = "fsl,imx7ulp-spi";
> + reg = <0x5a000000 0x10000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&gic>;
> + clocks = <&spi0_lpcg IMX_LPCG_CLK_0>,
> + <&spi0_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "per", "ipg";
> + assigned-clocks = <&clk IMX_SC_R_SPI_0
> IMX_SC_PM_CLK_PER>;
> + assigned-clock-rates = <20000000>;
> + power-domains = <&pd IMX_SC_R_SPI_0>;
> + status = "disabled";
> + };
> +
> + lpspi1: spi@5a010000 {
> + compatible = "fsl,imx7ulp-spi";
> + reg = <0x5a010000 0x10000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&gic>;
> + clocks = <&spi1_lpcg IMX_LPCG_CLK_0>,
> + <&spi1_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "per", "ipg";
> + assigned-clocks = <&clk IMX_SC_R_SPI_1
> IMX_SC_PM_CLK_PER>;
> + assigned-clock-rates = <60000000>;
> + power-domains = <&pd IMX_SC_R_SPI_1>;
> + status = "disabled";
> + };
> +
> + lpspi2: spi@5a020000 {
> + compatible = "fsl,imx7ulp-spi";
> + reg = <0x5a020000 0x10000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&gic>;
> + clocks = <&spi2_lpcg IMX_LPCG_CLK_0>,
> + <&spi2_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "per", "ipg";
> + assigned-clocks = <&clk IMX_SC_R_SPI_2
> IMX_SC_PM_CLK_PER>;
> + assigned-clock-rates = <60000000>;
> + power-domains = <&pd IMX_SC_R_SPI_2>;
> + status = "disabled";
> + };
> +
> + lpspi3: spi@5a030000 {
> + compatible = "fsl,imx7ulp-spi";
> + reg = <0x5a030000 0x10000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&gic>;
> + clocks = <&spi3_lpcg IMX_LPCG_CLK_0>,
> + <&spi3_lpcg IMX_LPCG_CLK_4>;
> + clock-names = "per", "ipg";
> + assigned-clocks = <&clk IMX_SC_R_SPI_3
> IMX_SC_PM_CLK_PER>;
> + assigned-clock-rates = <60000000>;
> + power-domains = <&pd IMX_SC_R_SPI_3>;
> + status = "disabled";
> + };
> +
> + can0_lpcg: clock-controller@5acd0000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5acd0000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&clk IMX_SC_R_CAN_0 IMX_SC_PM_CLK_PER>,
> + <&dma_ipg_clk>, <&dma_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>,
> + <IMX_LPCG_CLK_5>;
> + clock-output-names = "can0_lpcg_pe_clk",
> + "can0_lpcg_ipg_clk",
> + "can0_lpcg_chi_clk";
> + power-domains = <&pd IMX_SC_R_CAN_0>;
> + };
> };
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
> b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
> index 6446e6df7a9ac..61c506b0c1456 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
> @@ -107,6 +107,20 @@ lsio_gpio7: gpio@5d0f0000 {
> power-domains = <&pd IMX_SC_R_GPIO_7>;
> };
>
> + flexspi0: spi@5d120000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "nxp,imx8qxp-fspi";
> + reg = <0x5d120000 0x10000>, <0x08000000 0x10000000>;
> + reg-names = "fspi_base", "fspi_mmap";
> + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>,
> + <&clk IMX_SC_R_FSPI_0 IMX_SC_PM_CLK_PER>;
> + clock-names = "fspi", "fspi_en";
> + power-domains = <&pd IMX_SC_R_FSPI_0>;
> + status = "disabled";
> + };
> +
> lsio_mu0: mailbox@5d1b0000 {
> reg = <0x5d1b0000 0x10000>;
> interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; diff --git
> a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
> b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
> new file mode 100644
> index 0000000000000..052a30182eb4e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
> @@ -0,0 +1,463 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019~2020, 2022 NXP
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8dxl.dtsi"
> +
> +/ {
> + model = "Freescale i.MX8DXL EVK";
> + compatible = "fsl,imx8dxl-evk", "fsl,imx8dxl";
> +
> + aliases {
> + i2c2 = &i2c2;
> + mmc0 = &usdhc1;
> + mmc1 = &usdhc2;
> + serial0 = &lpuart0;
> + };
> +
> + chosen {
> + stdout-path = &lpuart0;
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0x00000000 0x80000000 0 0x40000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /*
> + * Memory reserved for optee usage. Please do not use.
> + * This will be automatically added to dtb if OP-TEE is installed.
> + * optee@96000000 {
> + * reg = <0 0x96000000 0 0x2000000>;
> + * no-map;
> + * };
> + */
> +
> + /* global autoconfigured region for contiguous allocations */
> + linux,cma {
> + compatible = "shared-dma-pool";
> + reusable;
> + size = <0 0x14000000>;
> + alloc-ranges = <0 0x98000000 0 0x14000000>;
> + linux,cma-default;
> + };
> + };
> +
> + mux3_en: regulator-0 {
> + compatible = "regulator-fixed";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-name = "mux3_en";
> + gpio = <&pca6416_2 8 GPIO_ACTIVE_LOW>;
> + regulator-always-on;
> + };
> +
> + reg_fec1_sel: regulator-1 {
> + compatible = "regulator-fixed";
> + regulator-name = "fec1_supply";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + gpio = <&pca6416_1 11 GPIO_ACTIVE_HIGH>;
> + regulator-always-on;
> + status = "disabled";
> + };
> +
> + reg_fec1_io: regulator-2 {
> + compatible = "regulator-fixed";
> + regulator-name = "fec1_io_supply";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + gpio = <&max7322 0 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + regulator-always-on;
> + status = "disabled";
> + };
> +
> + reg_usdhc2_vmmc: regulator-3 {
> + compatible = "regulator-fixed";
> + regulator-name = "SD1_SPWR";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + gpio = <&lsio_gpio4 30 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + off-on-delay-us = <3480>;
> + };
> +};
> +
> +&eqos {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_eqos>;
> + phy-mode = "rgmii-id";
> + phy-handle = <ðphy0>;
> + nvmem-cells = <&fec_mac1>;
> + nvmem-cell-names = "mac-address";
> + snps,reset-gpios = <&pca6416_1 2 GPIO_ACTIVE_LOW>;
> + snps,reset-delays-us = <10 20 200000>;
> + status = "okay";
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy0: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + eee-broken-1000t;
> + qca,disable-smarteee;
> + vddio-supply = <&vddio0>;
> +
> + vddio0: vddio-regulator {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + };
> + };
> +};
> +
> +/*
> + * fec1 shares the some PINs with usdhc2.
> + * by default usdhc2 is enabled in this dts.
> + * Please disable usdhc2 to enable fec1 */
> +&fec1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_fec1>;
> + phy-mode = "rgmii-txid";
> + phy-handle = <ðphy1>;
> + fsl,magic-packet;
> + rx-internal-delay-ps = <2000>;
> + nvmem-cells = <&fec_mac0>;
> + nvmem-cell-names = "mac-address";
> + phy-reset-gpios = <&pca6416_1 0 GPIO_ACTIVE_LOW>;
> + phy-reset-duration = <10>;
> + phy-reset-post-delay = <150>;
> + status = "disabled";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ethphy1: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <1>;
> + qca,disable-smarteee;
> + vddio-supply = <&vddio1>;
> +
> + vddio1: vddio-regulator {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + };
> + };
> +};
> +
> +&flexspi0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_flexspi0>;
> + nxp,fspi-dll-slvdly = <4>;
> + status = "okay";
> +
> + mt35xu512aba0: flash@0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <133000000>;
> + spi-tx-bus-width = <8>;
> + spi-rx-bus-width = <8>;
> + };
> +};
> +
> +&i2c2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + pca6416_1: gpio@20 {
> + compatible = "ti,tca6416";
> + reg = <0x20>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + pca6416_2: gpio@21 {
> + compatible = "ti,tca6416";
> + reg = <0x21>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + pca9548_1: i2c-mux@70 {
> + compatible = "nxp,pca9548";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> +
> + i2c@0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0>;
> +
> + max7322: gpio@68 {
> + compatible = "maxim,max7322";
> + reg = <0x68>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + status = "disabled";
> + };
> + };
> +
> + i2c@4 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x4>;
> + };
> +
> + i2c@5 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x5>;
> + };
> +
> + i2c@6 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x6>;
> + };
> + };
> +};
> +
> +&lpuart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lpuart0>;
> + status = "okay";
> +};
> +
> +&lsio_gpio4 {
> + status = "okay";
> +};
> +
> +&lsio_gpio5 {
> + status = "okay";
> +};
> +
> +&thermal_zones {
> + pmic-thermal0 {
> + polling-delay-passive = <250>;
> + polling-delay = <2000>;
> + thermal-sensors = <&tsens IMX_SC_R_PMIC_0>;
> +
> + trips {
> + pmic_alert0: trip0 {
> + temperature = <110000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + pmic_crit0: trip1 {
> + temperature = <125000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&pmic_alert0>;
> + cooling-device =
> + <&A35_0 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&A35_1 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> +};
> +
> +&usdhc1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc1>;
> + bus-width = <8>;
> + no-sd;
> + no-sdio;
> + non-removable;
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> + bus-width = <4>;
> + vmmc-supply = <®_usdhc2_vmmc>;
> + cd-gpios = <&lsio_gpio5 1 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&lsio_gpio5 0 GPIO_ACTIVE_HIGH>;
> + max-frequency = <100000000>;
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD
> 0x000514a0
> + IMX8DXL_COMP_CTL_GPIO_1V8_3V3_GPIORHK_PAD
> 0x000014a0
> + IMX8DXL_SPI3_CS0_ADMA_ACM_MCLK_OUT1
> 0x0600004c
> + IMX8DXL_SNVS_TAMPER_OUT1_LSIO_GPIO2_IO05_IN
> 0x0600004c
> + >;
> + };
> +
> + pinctrl_usbotg1: usbotg1grp {
> + fsl,pins = <
> + IMX8DXL_USB_SS3_TC0_CONN_USB_OTG1_PWR
> 0x00000021
> + >;
> + };
> +
> + pinctrl_usbotg2: usbotg2grp {
> + fsl,pins = <
> + IMX8DXL_USB_SS3_TC1_CONN_USB_OTG2_PWR
> 0x00000021
> + >;
> + };
> +
> + pinctrl_eqos: eqosgrp {
> + fsl,pins = <
> + IMX8DXL_ENET0_MDC_CONN_EQOS_MDC
> 0x06000020
> + IMX8DXL_ENET0_MDIO_CONN_EQOS_MDIO
> 0x06000020
> +
> IMX8DXL_ENET1_RGMII_TX_CTL_CONN_EQOS_RGMII_TX_CTL
> 0x06000020
> +
> IMX8DXL_ENET1_RGMII_TXC_CONN_EQOS_RGMII_TXC
> 0x06000020
> +
> IMX8DXL_ENET1_RGMII_TXD0_CONN_EQOS_RGMII_TXD0
> 0x06000020
> +
> IMX8DXL_ENET1_RGMII_TXD1_CONN_EQOS_RGMII_TXD1
> 0x06000020
> +
> IMX8DXL_ENET1_RGMII_TXD2_CONN_EQOS_RGMII_TXD2
> 0x06000020
> +
> IMX8DXL_ENET1_RGMII_TXD3_CONN_EQOS_RGMII_TXD3
> 0x06000020
> +
> IMX8DXL_ENET1_RGMII_RXC_CONN_EQOS_RGMII_RXC
> 0x06000020
> +
> IMX8DXL_ENET1_RGMII_RX_CTL_CONN_EQOS_RGMII_RX_CTL
> 0x06000020
> +
> IMX8DXL_ENET1_RGMII_RXD0_CONN_EQOS_RGMII_RXD0
> 0x06000020
> +
> IMX8DXL_ENET1_RGMII_RXD1_CONN_EQOS_RGMII_RXD1
> 0x06000020
> +
> IMX8DXL_ENET1_RGMII_RXD2_CONN_EQOS_RGMII_RXD2
> 0x06000020
> +
> IMX8DXL_ENET1_RGMII_RXD3_CONN_EQOS_RGMII_RXD3
> 0x06000020
> + >;
> + };
> +
> + pinctrl_flexspi0: flexspi0grp {
> + fsl,pins = <
> + IMX8DXL_QSPI0A_DATA0_LSIO_QSPI0A_DATA0
> 0x06000021
> + IMX8DXL_QSPI0A_DATA1_LSIO_QSPI0A_DATA1
> 0x06000021
> + IMX8DXL_QSPI0A_DATA2_LSIO_QSPI0A_DATA2
> 0x06000021
> + IMX8DXL_QSPI0A_DATA3_LSIO_QSPI0A_DATA3
> 0x06000021
> + IMX8DXL_QSPI0A_DQS_LSIO_QSPI0A_DQS
> 0x06000021
> + IMX8DXL_QSPI0A_SS0_B_LSIO_QSPI0A_SS0_B
> 0x06000021
> + IMX8DXL_QSPI0A_SCLK_LSIO_QSPI0A_SCLK
> 0x06000021
> + IMX8DXL_QSPI0B_SCLK_LSIO_QSPI0B_SCLK
> 0x06000021
> + IMX8DXL_QSPI0B_DATA0_LSIO_QSPI0B_DATA0
> 0x06000021
> + IMX8DXL_QSPI0B_DATA1_LSIO_QSPI0B_DATA1
> 0x06000021
> + IMX8DXL_QSPI0B_DATA2_LSIO_QSPI0B_DATA2
> 0x06000021
> + IMX8DXL_QSPI0B_DATA3_LSIO_QSPI0B_DATA3
> 0x06000021
> + IMX8DXL_QSPI0B_DQS_LSIO_QSPI0B_DQS
> 0x06000021
> + IMX8DXL_QSPI0B_SS0_B_LSIO_QSPI0B_SS0_B
> 0x06000021
> + >;
> + };
> +
> + pinctrl_fec1: fec1grp {
> + fsl,pins = <
> +
> IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD
> 0x000014a0
> +
> IMX8DXL_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD
> 0x000014a0
> + IMX8DXL_ENET0_MDC_CONN_ENET0_MDC
> 0x06000020
> + IMX8DXL_ENET0_MDIO_CONN_ENET0_MDIO
> 0x06000020
> +
> IMX8DXL_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL
> 0x00000060
> +
> IMX8DXL_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC
> 0x00000060
> +
> IMX8DXL_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0
> 0x00000060
> +
> IMX8DXL_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1
> 0x00000060
> +
> IMX8DXL_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2
> 0x00000060
> +
> IMX8DXL_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3
> 0x00000060
> +
> IMX8DXL_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC
> 0x00000060
> +
> IMX8DXL_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL
> 0x00000060
> +
> IMX8DXL_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0
> 0x00000060
> +
> IMX8DXL_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1
> 0x00000060
> +
> IMX8DXL_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2
> 0x00000060
> +
> IMX8DXL_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3
> 0x00000060
> + >;
> + };
> +
> + pinctrl_lpspi3: lpspi3grp {
> + fsl,pins = <
> + IMX8DXL_SPI3_SCK_ADMA_SPI3_SCK
> 0x6000040
> + IMX8DXL_SPI3_SDO_ADMA_SPI3_SDO
> 0x6000040
> + IMX8DXL_SPI3_SDI_ADMA_SPI3_SDI
> 0x6000040
> + IMX8DXL_SPI3_CS1_ADMA_SPI3_CS1
> 0x6000040
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + IMX8DXL_SPI1_SCK_ADMA_I2C2_SDA
> 0x06000021
> + IMX8DXL_SPI1_SDO_ADMA_I2C2_SCL
> 0x06000021
> + >;
> + };
> +
> + pinctrl_cm40_lpuart: cm40lpuartgrp {
> + fsl,pins = <
> + IMX8DXL_ADC_IN2_M40_UART0_RX
> 0x06000020
> + IMX8DXL_ADC_IN3_M40_UART0_TX
> 0x06000020
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + IMX8DXL_SPI1_CS0_ADMA_I2C3_SDA
> 0x06000021
> + IMX8DXL_SPI1_SDI_ADMA_I2C3_SCL
> 0x06000021
> + >;
> + };
> +
> + pinctrl_lpuart0: lpuart0grp {
> + fsl,pins = <
> + IMX8DXL_UART0_RX_ADMA_UART0_RX
> 0x06000020
> + IMX8DXL_UART0_TX_ADMA_UART0_TX
> 0x06000020
> + >;
> + };
> +
> + pinctrl_usdhc1: usdhc1grp {
> + fsl,pins = <
> + IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK
> 0x06000041
> + IMX8DXL_EMMC0_CMD_CONN_EMMC0_CMD
> 0x00000021
> + IMX8DXL_EMMC0_DATA0_CONN_EMMC0_DATA0
> 0x00000021
> + IMX8DXL_EMMC0_DATA1_CONN_EMMC0_DATA1
> 0x00000021
> + IMX8DXL_EMMC0_DATA2_CONN_EMMC0_DATA2
> 0x00000021
> + IMX8DXL_EMMC0_DATA3_CONN_EMMC0_DATA3
> 0x00000021
> + IMX8DXL_EMMC0_DATA4_CONN_EMMC0_DATA4
> 0x00000021
> + IMX8DXL_EMMC0_DATA5_CONN_EMMC0_DATA5
> 0x00000021
> + IMX8DXL_EMMC0_DATA6_CONN_EMMC0_DATA6
> 0x00000021
> + IMX8DXL_EMMC0_DATA7_CONN_EMMC0_DATA7
> 0x00000021
> + IMX8DXL_EMMC0_STROBE_CONN_EMMC0_STROBE
> 0x00000041
> + >;
> + };
> +
> + pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> + fsl,pins = <
> + IMX8DXL_ENET0_RGMII_TX_CTL_LSIO_GPIO4_IO30
> 0x00000040 /* RESET_B */
> + IMX8DXL_ENET0_RGMII_TXD1_LSIO_GPIO5_IO00
> 0x00000021 /* WP */
> + IMX8DXL_ENET0_RGMII_TXD2_LSIO_GPIO5_IO01
> 0x00000021 /* CD */
> + >;
> + };
> +
> + pinctrl_usdhc2: usdhc2grp {
> + fsl,pins = <
> + IMX8DXL_ENET0_RGMII_RXC_CONN_USDHC1_CLK
> 0x06000041
> +
> IMX8DXL_ENET0_RGMII_RX_CTL_CONN_USDHC1_CMD 0x00000021
> +
> IMX8DXL_ENET0_RGMII_RXD0_CONN_USDHC1_DATA0 0x00000021
> +
> IMX8DXL_ENET0_RGMII_RXD1_CONN_USDHC1_DATA1 0x00000021
> +
> IMX8DXL_ENET0_RGMII_RXD2_CONN_USDHC1_DATA2 0x00000021
> +
> IMX8DXL_ENET0_RGMII_RXD3_CONN_USDHC1_DATA3 0x00000021
> +
> IMX8DXL_ENET0_RGMII_TXD0_CONN_USDHC1_VSELECT
> 0x00000021
> + >;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
> b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
> new file mode 100644
> index 0000000000000..e26bbbf7f1508
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
> @@ -0,0 +1,72 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019~2020, 2022 NXP
> + */
> +
> +&audio_ipg_clk {
> + clock-frequency = <160000000>;
> +};
> +
> +&dma_ipg_clk {
> + clock-frequency = <160000000>;
> +};
> +
> +&i2c0 {
> + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
> + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&i2c1 {
> + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
> + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&i2c2 {
> + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
> + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&i2c3 {
> + compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
> + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lpspi0 {
> + compatible = "fsl,imx8qxp-spi", "fsl,imx7ulp-spi";
> + interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lpspi1 {
> + compatible = "fsl,imx8qxp-spi", "fsl,imx7ulp-spi";
> + interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lpspi2 {
> + compatible = "fsl,imx8qxp-spi", "fsl,imx7ulp-spi";
> + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lpspi3 {
> + compatible = "fsl,imx8qxp-spi", "fsl,imx7ulp-spi";
> + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lpuart0 {
> + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
> + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lpuart1 {
> + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
> + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lpuart2 {
> + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
> + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lpuart3 {
> + compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
> + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; };
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> new file mode 100644
> index 0000000000000..98f666cbe63bf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> @@ -0,0 +1,145 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019~2020, 2022 NXP
> + */
> +
> +/delete-node/ &enet1_lpcg;
> +/delete-node/ &fec2;
> +
> +&conn_subsys {
> + conn_enet0_root_clk: clock-conn-enet0-root {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <250000000>;
> + clock-output-names = "conn_enet0_root_clk";
> + };
> +
> + eqos: ethernet@5b050000 {
> + compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a";
> + reg = <0x5b050000 0x10000>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "eth_wake_irq", "macirq";
> + clocks = <&eqos_lpcg IMX_LPCG_CLK_4>,
> + <&eqos_lpcg IMX_LPCG_CLK_6>,
> + <&eqos_lpcg IMX_LPCG_CLK_0>,
> + <&eqos_lpcg IMX_LPCG_CLK_5>,
> + <&eqos_lpcg IMX_LPCG_CLK_2>;
> + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
> + assigned-clocks = <&clk IMX_SC_R_ENET_1
> IMX_SC_PM_CLK_PER>;
> + assigned-clock-rates = <125000000>;
> + power-domains = <&pd IMX_SC_R_ENET_1>;
> + clk_csr = <0>;
> + status = "disabled";
> + };
> +
> + usbotg2: usb@5b0e0000 {
> + compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb";
> + reg = <0x5b0e0000 0x200>;
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
> + fsl,usbphy = <&usbphy2>;
> + fsl,usbmisc = <&usbmisc2 0>;
> + /*
> + * usbotg1 and usbotg2 share one clcok.
> + * scu firmware disables the access to the clock and keeps
> + * it always on in case other core (M4) uses one of these.
> + */
> + clocks = <&clk_dummy>;
> + ahb-burst-config = <0x0>;
> + tx-burst-size-dword = <0x10>;
> + rx-burst-size-dword = <0x10>;
> + #stream-id-cells = <1>;
> + power-domains = <&pd IMX_SC_R_USB_1>;
> + status = "disabled";
> +
> + clk_dummy: clock-dummy {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <0>;
> + clock-output-names = "clk_dummy";
> + };
> + };
> +
> + usbmisc2: usbmisc@5b0e0200 {
> + #index-cells = <1>;
> + compatible = "fsl,imx7ulp-usbmisc";
> + reg = <0x5b0e0200 0x200>;
> + };
> +
> + usbphy2: usbphy@0x5b110000 {
> + compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy";
> + reg = <0x5b110000 0x1000>;
> + clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>;
> + power-domains = <&pd IMX_SC_R_USB_1_PHY>;
> + status = "disabled";
> + };
> +
> + eqos_lpcg: clock-controller@5b240000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5b240000 0x10000>;
> + #clock-cells = <1>;
> +
> + clocks = <&conn_enet0_root_clk>,
> + <&conn_axi_clk>,
> + <&conn_axi_clk>,
> + <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
> + <&conn_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_2>,
> + <IMX_LPCG_CLK_4>, <IMX_LPCG_CLK_5>,
> + <IMX_LPCG_CLK_6>;
> + clock-output-names = "eqos_ptp",
> + "eqos_mem_clk",
> + "eqos_aclk",
> + "eqos_clk",
> + "eqos_csr_clk";
> + power-domains = <&pd IMX_SC_R_ENET_1>;
> + };
> +
> + usb2_2_lpcg: clock-controller@5b280000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x5b280000 0x10000>;
> + #clock-cells = <1>;
> +
> + clock-indices = <IMX_LPCG_CLK_7>;
> + clocks = <&conn_ipg_clk>;
> + clock-output-names = "usboh3_2_phy_ipg_clk";
> + power-domains = <&pd IMX_SC_R_USB_1_PHY>;
> + };
> +
> +};
> +
> +&enet0_lpcg {
> + clocks = <&conn_enet0_root_clk>,
> + <&conn_enet0_root_clk>,
> + <&conn_axi_clk>,
> + <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>,
> + <&conn_ipg_clk>,
> + <&conn_ipg_clk>;
> +};
> +
> +&fec1 {
> + compatible = "fsl,imx8qm-fec";
> + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
> + assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
> + assigned-clock-rates = <125000000>;
> +};
> +
> +&usdhc1 {
> + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
> + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&usdhc2 {
> + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
> + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&usdhc3 {
> + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc";
> + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; };
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
> b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
> new file mode 100644
> index 0000000000000..550f513708d85
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
> @@ -0,0 +1,9 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2020 NXP
> + */
> +
> +&ddr_pmu0 {
> + compatible = "fsl,imx8-ddr-pmu";
> + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; };
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
> b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
> new file mode 100644
> index 0000000000000..4aaedb6ce591a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
> @@ -0,0 +1,78 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019~2020, 2022 NXP
> + */
> +&flexspi0 {
> + compatible = "nxp,imx8dxl-fspi";
> + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_gpio0 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_gpio1 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_gpio2 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_gpio3 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_gpio4 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_gpio5 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_gpio6 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_gpio7 {
> + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio";
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_mu0 {
> + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_mu1 {
> + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_mu2 {
> + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_mu3 {
> + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_mu4 {
> + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; };
> +
> +&lsio_mu5 {
> + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
> + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; };
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> new file mode 100644
> index 0000000000000..037591fb01a55
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> @@ -0,0 +1,238 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019~2020, 2022 NXP
> + */
> +
> +#include <dt-bindings/clock/imx8-clock.h> #include
> +<dt-bindings/firmware/imx/rsrc.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/pads-imx8dxl.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + aliases {
> + ethernet0 = &fec1;
> + ethernet1 = &eqos;
> + gpio0 = &lsio_gpio0;
> + gpio1 = &lsio_gpio1;
> + gpio2 = &lsio_gpio2;
> + gpio3 = &lsio_gpio3;
> + gpio4 = &lsio_gpio4;
> + gpio5 = &lsio_gpio5;
> + gpio6 = &lsio_gpio6;
> + gpio7 = &lsio_gpio7;
> + mu1 = &lsio_mu1;
> + };
> +
> + cpus: cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + /* We have 1 clusters with 2 Cortex-A35 cores */
> + A35_0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a35";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + next-level-cache = <&A35_L2>;
> + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
> + #cooling-cells = <2>;
> + operating-points-v2 = <&a35_opp_table>;
> + };
> +
> + A35_1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a35";
> + reg = <0x0 0x1>;
> + enable-method = "psci";
> + next-level-cache = <&A35_L2>;
> + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
> + #cooling-cells = <2>;
> + operating-points-v2 = <&a35_opp_table>;
> + };
> +
> + A35_L2: l2-cache0 {
> + compatible = "cache";
> + };
> + };
> +
> + a35_opp_table: opp-table {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-900000000 {
> + opp-hz = /bits/ 64 <900000000>;
> + opp-microvolt = <1000000>;
> + clock-latency-ns = <150000>;
> + };
> +
> + opp-1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <1100000>;
> + clock-latency-ns = <150000>;
> + opp-suspend;
> + };
> + };
> +
> + gic: interrupt-controller@51a00000 {
> + compatible = "arm,gic-v3";
> + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
> + <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base)
> */
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + dsp_reserved: dsp@92400000 {
> + reg = <0 0x92400000 0 0x2000000>;
> + no-map;
> + };
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + system-controller {
> + compatible = "fsl,imx-scu";
> + mbox-names = "tx0",
> + "rx0",
> + "gip3";
> + mboxes = <&lsio_mu1 0 0
> + &lsio_mu1 1 0
> + &lsio_mu1 3 3>;
> +
> + pd: power-controller {
> + compatible = "fsl,scu-pd";
> + #power-domain-cells = <1>;
> + wakeup-irq = <160 163 235 236 237 228 229 230 231
> 238
> + 239 240 166 169>;
> + };
> +
> + clk: clock-controller {
> + compatible = "fsl,imx8dxl-clk", "fsl,scu-clk";
> + #clock-cells = <2>;
> + clocks = <&xtal32k &xtal24m>;
> + clock-names = "xtal_32KHz", "xtal_24Mhz";
> + };
> +
> + iomuxc: pinctrl {
> + compatible = "fsl,imx8dxl-iomuxc";
> + };
> +
> + ocotp: ocotp {
> + compatible = "fsl,imx8qxp-scu-ocotp";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + fec_mac0: mac@2c4 {
> + reg = <0x2c4 6>;
> + };
> +
> + fec_mac1: mac@2c6 {
> + reg = <0x2c6 6>;
> + };
> + };
> +
> + rtc: rtc {
> + compatible = "fsl,imx8qxp-sc-rtc";
> + };
> +
> + sc_pwrkey: keys {
> + compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
> + linux,keycode = <KEY_POWER>;
> + wakeup-source;
> + };
> +
> + watchdog {
> + compatible = "fsl,imx-sc-wdt";
> + timeout-sec = <60>;
> + };
> +
> + tsens: thermal-sensor {
> + compatible = "fsl,imx-sc-thermal";
> + #thermal-sensor-cells = <1>;
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical
> Secure */
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical
> Non-Secure */
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor
> */
> + };
> +
> + thermal_zones: thermal-zones {
> + cpu-thermal0 {
> + polling-delay-passive = <250>;
> + polling-delay = <2000>;
> + thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
> +
> + trips {
> + cpu_alert0: trip0 {
> + temperature = <107000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> + cpu_crit0: trip1 {
> + temperature = <127000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&cpu_alert0>;
> + cooling-device =
> + <&A35_0 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>,
> + <&A35_1 THERMAL_NO_LIMIT
> THERMAL_NO_LIMIT>;
> + };
> + };
> + };
> + };
> +
> + /* The two values below cannot be changed by the board */
> + xtal32k: clock-xtal32k {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "xtal_32KHz";
> + };
> +
> + xtal24m: clock-xtal24m {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + clock-output-names = "xtal_24MHz";
> + };
> +
> + /* sorted in register address */
> + #include "imx8-ss-adma.dtsi"
> + #include "imx8-ss-conn.dtsi"
> + #include "imx8-ss-ddr.dtsi"
> + #include "imx8-ss-lsio.dtsi"
> +};
> +
> +#include "imx8dxl-ss-adma.dtsi"
> +#include "imx8dxl-ss-conn.dtsi"
> +#include "imx8dxl-ss-lsio.dtsi"
> +#include "imx8dxl-ss-ddr.dtsi"
> --
> 2.25.1
