On 8/5/22 2:53 AM, Krzysztof Kozlowski wrote: > On 05/08/2022 00:05, Sean Anderson wrote: >> This adds ids for the Lynx 10g SerDes's internal PLLs. These may be used >> witn assigned-clock* to specify a particular frequency to use. >> >> Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxx> >> --- >> >> Changes in v4: >> - New >> >> include/dt-bindings/clock/fsl,lynx-10g.h | 14 ++++++++++++++ >> 1 file changed, 14 insertions(+) >> create mode 100644 include/dt-bindings/clock/fsl,lynx-10g.h >> >> diff --git a/include/dt-bindings/clock/fsl,lynx-10g.h b/include/dt-bindings/clock/fsl,lynx-10g.h >> new file mode 100644 >> index 000000000000..f5b955658106 >> --- /dev/null >> +++ b/include/dt-bindings/clock/fsl,lynx-10g.h >> @@ -0,0 +1,14 @@ >> +/* SPDX-License-Identifier: GPL-2.0-only */ > > This should be dual license. This is just matching what the majority (263 out of 326) clock dt-bindings headers do. >> +/* >> + * Copyright (C) 2022 Sean Anderson <sean.anderson@xxxxxxxx> > > It's confusing to see personal copyrights with company email. Either the > copyright is attributed to your employer or to you. If to you, use > private email. I hold the copyright, and I would like inquiries to be directed to my work email (as I don't have this hardware at home). >> + */ >> + >> +#ifndef __DT_BINDINGS_CLK_LYNX_10G_H >> +#define __DT_BINDINGS_CLK_LYNX_10G_H >> + >> +#define LYNX10G_CLKS_PER_PLL 2 >> + >> +#define LYNX10G_PLLa(a) ((a) * LYNX10G_CLKS_PER_PLL) >> +#define LYNX10G_PLLa_EX_DLY(a) ((a) * LYNX10G_CLKS_PER_PLL + 1) > > These do not look like proper IDs for clocks for bindings. Numbering > starts from 0 or 1 and any "a" needs to be clearly explained. What do > you bind here? This matches "a" is the index of the PLL. E.g. registers PLL1RSTCTL etc. This matches the notation used in the reference manual. Although for convenience, this driver considers the PLLs to start at 0 instead of 1. --Sean
