This patch enables the Microchip's FPGA QSPI and Polarfire SoC QSPI controller support. Tested spi-nand (W25N01GV) and spi-nor (MT25QL256A) on Microchip's ICICLE kit. tested using both FPGA QSPI and Polarfie SoC QSPI. changes in v3 ------------ 1. Added dev_err_probe() at places like probe failures 2. Split the dt-bindings one for adding coreqspi compatible and other one to add coreqspi as fallback to mpfs-qspi. changes in v2 ------------ 1. Replaced spi_alloc_master() with devm_spi_alloc_master() 2. Used dev_err_probe() when devm_spi_alloc_master() fails. 3. Added shared IRQ flag in the interrupt registration. 4. Updated the dt_bindings so that there is a differentiation between FPGA QSPI IP core and hard QSPI IP core. Naga Sureshkumar Relli (4): spi: dt-binding: document microchip coreQSPI spi: dt-binding: add coreqspi as a fallback for mpfs-qspi spi: microchip-core-qspi: Add support for microchip fpga qspi controllers MAINTAINERS: add qspi to Polarfire SoC entry .../bindings/spi/microchip,mpfs-spi.yaml | 15 +- MAINTAINERS | 1 + drivers/spi/Kconfig | 9 + drivers/spi/Makefile | 1 + drivers/spi/spi-microchip-core-qspi.c | 601 ++++++++++++++++++ 5 files changed, 623 insertions(+), 4 deletions(-) create mode 100644 drivers/spi/spi-microchip-core-qspi.c -- 2.25.1