On 2.08.2022 17:39, Krzysztof Kozlowski wrote:
> The Camera Control Interface I2C controller device node belongs to
> TITAN_TOP_GDSC power domain, so its children do not need to specify it
> again. The OV7251 and OV8856 camera sensor bindings do not allow
> power-domains.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
>
> ---
>
> Not tested on hardware.
> ---
Not tested on hardware either, but looks good.
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Konrad
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index c6e2c571b452..b9304f81290a 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -1228,8 +1228,6 @@ camera@10 {
> * both have to be enabled through the power management
> * gpios.
> */
> - power-domains = <&clock_camcc TITAN_TOP_GDSC>;
> -
> dovdd-supply = <&vreg_lvs1a_1p8>;
> avdd-supply = <&cam0_avdd_2v8>;
> dvdd-supply = <&cam0_dvdd_1v2>;
> @@ -1273,8 +1271,6 @@ camera@60 {
> *
> * No 1.2V vddd-supply regulator is used.
> */
> - power-domains = <&clock_camcc TITAN_TOP_GDSC>;
> -
> vdddo-supply = <&vreg_lvs1a_1p8>;
> vdda-supply = <&cam3_avdd_2v8>;
>
