Re: [PATCH] dt-bindings: sound: tlv320aic3x: Convert to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/08/2022 23:48, Jai Luthra wrote:
> Convert bindings for TI's TLV320AIC3x audio codecs to dtschema.
> 
> Signed-off-by: Jai Luthra <j-luthra@xxxxxx>
> ---


Thank you for your patch. There is something to discuss/improve.

> diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml b/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml
> new file mode 100644
> index 000000000000..6efb1d459543
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.yaml
> @@ -0,0 +1,145 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/tlv320aic3x.yaml#

Filename with vendor prefix, so ti,tlv320aic3x.yaml

> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments TLV320AIC3x Codec Device Tree Bindings

s/Device Tree Bindings//

> +
> +maintainers:
> +  - Jai Luthra <j-luthra@xxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,tlv320aic3x
> +      - ti,tlv320aic33
> +      - ti,tlv320aic3007
> +      - ti,tlv320aic3106
> +      - ti,tlv320aic3104
> +
> +  reg:
> +    maxItems: 1
> +    description: i2c slave address

Skip description.

> +
> +  reset-gpios:
> +    maxItems: 1
> +    description:
> +      GPIO specification for the active low RESET input.
> +
> +  ai3x-gpio-func:
> +    description: AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minItems: 3

uint32-array. Old bindings say about two items only. Mention any changes
to binding in cover letter.

> +    maxItems: 3
> +

You lost gpio-reset property. Also not explained in commit msg.

> +  ai3x-micbias-vg:
> +    description: MicBias required voltage. If node is omitted then MicBias is powered down.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    oneOf:
> +      - const: 1
> +        description: MICBIAS output is powered to 2.0V.
> +      - const: 2
> +        description: MICBIAS output is powered to 2.5V.
> +      - const: 3
> +        description: MICBIAS output is connected to AVDD.
> +
> +  ai3x-ocmv:
> +    description: Output Common-Mode Voltage selection.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    oneOf:
> +      - const: 0
> +        description: 1.35V
> +      - const: 1
> +        description: 1.5V
> +      - const: 2
> +        description: 1.65V
> +      - const: 3
> +        description: 1.8V
> +
> +  AVDD-supply:
> +    description: Analog DAC voltage.

New properties?

> +
> +  IOVDD-supply:
> +    description: I/O voltage.
> +
> +  DRVDD-supply:
> +    description: ADC analog and output driver voltage.
> +
> +  DVDD-supply:
> +    description: Digital core voltage.
> +
> +  '#sound-dai-cells':
> +    const: 0
> +
> +required:
> +  - compatible
> +  - reg
> +
> +#The pins can be used in referring sound node's audio-routing property.
> +
> +#CODEC output pins:
> +  # LLOUT
> +  # RLOUT
> +  # MONO_LOUT
> +  # HPLOUT
> +  # HPROUT
> +  # HPLCOM
> +  # HPRCOM
> +
> +#CODEC input pins for TLV320AIC3104:
> +  # MIC2L
> +  # MIC2R
> +  # LINE1L
> +  # LINE1R
> +
> +#CODEC input pins for other compatible codecs:
> +  # MIC3L
> +  # MIC3R
> +  # LINE1L
> +  # LINE2L
> +  # LINE1R
> +  # LINE2R

All this goes to top level description.


Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux