There are a few Ocelot chips that can contain SGPIO logic, but can be controlled externally. Specifically the VSC7511, 7512, 7513, and 7514. In the externally controlled configurations these registers are not memory-mapped. Add support for these non-memory-mapped configurations. Signed-off-by: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx> Reviewed-by: Vladimir Oltean <vladimir.oltean@xxxxxxx> Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- (No changes since v14) v14 * Add Reviewed and Acked tags --- drivers/pinctrl/pinctrl-microchip-sgpio.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c index e56074b7e659..2b4167a09b3b 100644 --- a/drivers/pinctrl/pinctrl-microchip-sgpio.c +++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c @@ -12,6 +12,7 @@ #include <linux/clk.h> #include <linux/gpio/driver.h> #include <linux/io.h> +#include <linux/mfd/ocelot.h> #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/pinctrl/pinmux.h> @@ -904,7 +905,6 @@ static int microchip_sgpio_probe(struct platform_device *pdev) struct reset_control *reset; struct sgpio_priv *priv; struct clk *clk; - u32 __iomem *regs; u32 val; struct regmap_config regmap_config = { .reg_bits = 32, @@ -937,11 +937,7 @@ static int microchip_sgpio_probe(struct platform_device *pdev) return -EINVAL; } - regs = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(regs)) - return PTR_ERR(regs); - - priv->regs = devm_regmap_init_mmio(dev, regs, ®map_config); + priv->regs = ocelot_regmap_from_resource(pdev, 0, ®map_config); if (IS_ERR(priv->regs)) return PTR_ERR(priv->regs); -- 2.25.1