From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> This set contains a few small improvements for the imx8mm-kontron devicetrees (patch 3-7) and support for a new SoM (patch 8, including baseboard) that complies to the Open Standard Module (OSM) 1.0 hardware specification, size S (https://sget.org/standards/osm). It also includes binding changes for the new board (patch 1) and a binding change for the PCA9450 PMIC regulators (patch2). Changes in v2: * move binding changes to beginning of patchset * Allow arbitrary regulator names in PCA9450 bindings * Use voltage rail names from schematic for PMIC regulator-names * Add SPI NOR partition layout to devicetree * Remove unneeded header include * Add tags Frieder Schrempf (8): dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board dt-bindings: regulator: pca9450: Allow arbitrary regulator names arm64: dts: imx8mm-kontron: Adjust board and SoM model strings arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card IO voltage arm64: dts: imx8mm-kontron: Remove low DDRC operating point arm64: dts: imx8mm-kontron: Use voltage rail names from schematic for PMIC regulator-names arm64: dts: imx8mm-kontron: Add SPI NOR partition layout arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S .../devicetree/bindings/arm/fsl.yaml | 6 + .../regulator/nxp,pca9450-regulator.yaml | 8 +- arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mm-kontron-n801x-s.dts | 5 +- .../freescale/imx8mm-kontron-n801x-som.dtsi | 51 ++- .../dts/freescale/imx8mm-kontron-n802x-s.dts | 376 ++++++++++++++++++ .../freescale/imx8mm-kontron-n802x-som.dtsi | 330 +++++++++++++++ 7 files changed, 754 insertions(+), 23 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n802x-s.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n802x-som.dtsi -- 2.37.1
