On Fri, Jul 29, 2022 at 4:01 PM AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> wrote: > > Il 29/07/22 05:24, Pin-yen Lin ha scritto: > > Switch to SMC watchdog because we need direct control of HW watchdog > > registers from kernel. The corresponding firmware was uploaded in > > https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3405. > > > > Signed-off-by: Pin-yen Lin <treapking@xxxxxxxxxxxx> > > --- > > > > Changes in v4: > > - Rename the watchdog node (smc_watchdog -> watchdog) > > - Correct the patch summary (mt8173-oak -> mt8173-elm) > > > > Changes in v3: > > - Remove /delete-node/ and create a new node for SMC watchdog. > > > > Changes in v2: > > - Move the modifications to mt8173-elm.dtsi and add some comments. > > > > arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi | 13 +++++++++++++ > > 1 file changed, 13 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > index e21feb85d822..421bb2945135 100644 > > --- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > +++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dtsi > > @@ -161,6 +161,19 @@ hdmi_connector_in: endpoint { > > }; > > }; > > }; > > + > > + > > You don't need two blank lines, just one is enough (please fix). This is already addressed in v5. Thanks for the review though. > > After which: > > Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> > > > + watchdog { > > + compatible = "arm,smc-wdt"; > > + }; > > +}; > > + > > +/* > > + * Disable the original MMIO watch dog and switch to the SMC watchdog, which > > + * operates on the same MMIO. > > + */ > > +&watchdog { > > + status = "disabled"; > > }; > > > > &mfg_async { > > > >
