From: Nick Hawkins <nick.hawkins@xxxxxxx> Changes since v6: *Removed spaces between tags on commit descriptions Changes since v5: *Fixed indentation in Kconfig file Changes since v4: *Removed unnecessary quotes in hpe,gxp-spifi.yaml Changes since v3: *Fixed indentations in hpe,gxp-spifi.yaml Changes since v2: *Changed the CONFIG_SPI_GXP from y to m in defconfig *Removed extra space around < > for reg in hpe,gxp-spifi.yaml *Changed interrupt-parrent to interrupt-parent in hpe,gxp-spifi.yaml *Removed repeated include file in spi-gxp.c *Removed unnecessary initialization of ret variable in spi-gxp.c *Removed conditional variable checks where failure is not possible in spi-gxp.c *Removed unnecessary variable cs in spi-gxp.c *Removed blank gxp-spifi-remove function in spi-gxp.c *Fixed error messages so they are not repetitive The GXP supports 3 separate SPI interfaces to accommodate the system flash, core flash, and other functions. The SPI engine supports variable clock frequency, selectable 3-byte or 4-byte addressing and a configurable x1, x2, and x4 command/address/data modes. The memory buffer for reading and writing ranges between 256 bytes and 8KB. This driver supports access to the core flash and bios part. Nick Hawkins (5): spi: spi-gxp: Add support for HPE GXP SoCs spi: dt-bindings: add documentation for hpe,gxp-spifi ARM: dts: hpe: Add spi driver node ARM: configs: multi_v7_defconfig: Enable HPE GXP SPI driver MAINTAINERS: add spi support to GXP .../bindings/spi/hpe,gxp-spifi.yaml | 56 +++ MAINTAINERS | 2 + arch/arm/boot/dts/hpe-bmc-dl360gen10.dts | 58 ++++ arch/arm/boot/dts/hpe-gxp.dtsi | 21 +- arch/arm/configs/multi_v7_defconfig | 1 + drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-gxp.c | 325 ++++++++++++++++++ 8 files changed, 470 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml create mode 100644 drivers/spi/spi-gxp.c -- 2.17.1
