[PATCH RESEND v6 22/23] ata: ahci-dwc: Add Baikal-T1 AHCI SATA interface support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It's almost fully compatible DWC AHCI SATA IP-core derivative except the
reference clocks source, which need to be very carefully selected. In
particular the DWC AHCI SATA PHY can be clocked either from the pads
ref_pad_clk_{m,p} or from the internal wires ref_alt_clk_{m,n}. In the
later case the clock signal is generated from the Baikal-T1 CCU SATA PLL.
The clocks source is selected by means of the ref_use_pad wire connected
to the CCU SATA reference clock CSR.

In normal situation it would be much more handy to use the internal
reference clock source, but alas we haven't managed to make the AHCI
controller working well with it so far. So it's preferable to have the
controller clocked from the external clock generator and fallback to the
internal clock source only as a last resort. Other than that the
controller is full compatible with the DWC AHCI SATA IP-core.

Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>

---

Changelog v2:
- Rename 'syscon' property to 'baikal,bt1-syscon'.
- Change the local objects prefix from 'dwc_ahci_' to 'ahci_dwc_',
  from 'bt1_ahci_' to 'ahci_bt1_'. (@Damien)

Changelog v4:
- Convert ahci_bt1_plat to being statically defined. (@kbot)
- Drop Baikal-T1 syscon reference relying on the clock controller
  and the platform setup having the proper clock source selected. (@Rob)
---
 drivers/ata/Kconfig    |  1 +
 drivers/ata/ahci_dwc.c | 55 ++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 675bb44144d3..79242d82c755 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -179,6 +179,7 @@ config AHCI_DM816
 config AHCI_DWC
 	tristate "Synopsys DWC AHCI SATA support"
 	select SATA_HOST
+	select MFD_SYSCON if (MIPS_BAIKAL_T1 || COMPILE_TEST)
 	help
 	  This option enables support for the Synopsys DWC AHCI SATA
 	  controller implementation.
diff --git a/drivers/ata/ahci_dwc.c b/drivers/ata/ahci_dwc.c
index 44a9bb7696ab..03a1af1c2b1f 100644
--- a/drivers/ata/ahci_dwc.c
+++ b/drivers/ata/ahci_dwc.c
@@ -13,10 +13,12 @@
 #include <linux/kernel.h>
 #include <linux/libata.h>
 #include <linux/log2.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
+#include <linux/regmap.h>
 
 #include "ahci.h"
 
@@ -90,6 +92,20 @@
 #define AHCI_DWC_PORT_PHYCR		0x74
 #define AHCI_DWC_PORT_PHYSR		0x78
 
+/* Baikal-T1 AHCI SATA specific registers */
+#define AHCI_BT1_HOST_PHYCR		AHCI_DWC_HOST_GPCR
+#define AHCI_BT1_HOST_MPLM_MASK		GENMASK(29, 23)
+#define AHCI_BT1_HOST_LOSDT_MASK	GENMASK(22, 20)
+#define AHCI_BT1_HOST_CRR		BIT(19)
+#define AHCI_BT1_HOST_CRW		BIT(18)
+#define AHCI_BT1_HOST_CRCD		BIT(17)
+#define AHCI_BT1_HOST_CRCA		BIT(16)
+#define AHCI_BT1_HOST_CRDI_MASK		GENMASK(15, 0)
+
+#define AHCI_BT1_HOST_PHYSR		AHCI_DWC_HOST_GPSR
+#define AHCI_BT1_HOST_CRA		BIT(16)
+#define AHCI_BT1_HOST_CRDO_MASK		GENMASK(15, 0)
+
 struct ahci_dwc_plat_data {
 	unsigned int pflags;
 	unsigned int hflags;
@@ -106,6 +122,39 @@ struct ahci_dwc_host_priv {
 	u32 dmacr[AHCI_MAX_PORTS];
 };
 
+static int ahci_bt1_init(struct ahci_host_priv *hpriv)
+{
+	struct ahci_dwc_host_priv *dpriv = hpriv->plat_data;
+	int ret;
+
+	/* APB, application and reference clocks are required */
+	if (!ahci_platform_find_clk(hpriv, "pclk") ||
+	    !ahci_platform_find_clk(hpriv, "aclk") ||
+	    !ahci_platform_find_clk(hpriv, "ref")) {
+		dev_err(&dpriv->pdev->dev, "No system clocks specified\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Fully reset the SATA AXI and ref clocks domain to ensure the state
+	 * machine is working from scratch especially if the reference clocks
+	 * source has been changed.
+	 */
+	ret = ahci_platform_assert_rsts(hpriv);
+	if (ret) {
+		dev_err(&dpriv->pdev->dev, "Couldn't assert the resets\n");
+		return ret;
+	}
+
+	ret = ahci_platform_deassert_rsts(hpriv);
+	if (ret) {
+		dev_err(&dpriv->pdev->dev, "Couldn't de-assert the resets\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static struct ahci_host_priv *ahci_dwc_get_resources(struct platform_device *pdev)
 {
 	struct ahci_dwc_host_priv *dpriv;
@@ -416,9 +465,15 @@ static struct ahci_dwc_plat_data ahci_dwc_plat = {
 	.pflags = AHCI_PLATFORM_GET_RESETS,
 };
 
+static struct ahci_dwc_plat_data ahci_bt1_plat = {
+	.pflags = AHCI_PLATFORM_GET_RESETS | AHCI_PLATFORM_RST_TRIGGER,
+	.init = ahci_bt1_init,
+};
+
 static const struct of_device_id ahci_dwc_of_match[] = {
 	{ .compatible = "snps,dwc-ahci", &ahci_dwc_plat },
 	{ .compatible = "snps,spear-ahci", &ahci_dwc_plat },
+	{ .compatible = "baikal,bt1-ahci", &ahci_bt1_plat },
 	{},
 };
 MODULE_DEVICE_TABLE(of, ahci_dwc_of_match);
-- 
2.35.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux