Re: [PATCH v4 3/3] arm64: dts: imx: add imx8dxl support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22-07-26 15:41:11, Shenwei Wang wrote:
> i.MX8DXL is a device targeting the automotive and industrial market
> segments. The chip is designed to achieve both high performance and
> low power consumption. It has a dual (2x) Cortex-A35 processor.
> 
> This patch adds the imx8dxl soc and EVK board support.
> 
> Signed-off-by: Shenwei Wang <shenwei.wang@xxxxxxx>
> ---
[...]
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> new file mode 100644
> index 0000000000000..517036639674c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
> @@ -0,0 +1,238 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright 2019~2020 NXP
> + */
> +
> +#include <dt-bindings/clock/imx8-clock.h>
> +#include <dt-bindings/firmware/imx/rsrc.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/pads-imx8dxl.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> +	interrupt-parent = <&gic>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		ethernet0 = &fec1;
> +		ethernet1 = &eqos;
> +		gpio0 = &lsio_gpio0;
> +		gpio1 = &lsio_gpio1;
> +		gpio2 = &lsio_gpio2;
> +		gpio3 = &lsio_gpio3;
> +		gpio4 = &lsio_gpio4;
> +		gpio5 = &lsio_gpio5;
> +		gpio6 = &lsio_gpio6;
> +		gpio7 = &lsio_gpio7;
> +		mu1 = &lsio_mu1;
> +	};
> +
> +	cpus: cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		/* We have 1 clusters with 2 Cortex-A35 cores */
> +		A35_0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x0>;
> +			enable-method = "psci";
> +			next-level-cache = <&A35_L2>;
> +			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
> +			#cooling-cells = <2>;
> +			operating-points-v2 = <&a35_opp_table>;
> +		};
> +
> +		A35_1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a35";
> +			reg = <0x0 0x1>;
> +			enable-method = "psci";
> +			next-level-cache = <&A35_L2>;
> +			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
> +			#cooling-cells = <2>;
> +			operating-points-v2 = <&a35_opp_table>;
> +		};
> +
> +		A35_L2: l2-cache0 {
> +			compatible = "cache";
> +		};
> +	};
> +
> +	a35_opp_table: opp-table {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp-900000000 {
> +			opp-hz = /bits/ 64 <900000000>;
> +			opp-microvolt = <1000000>;
> +			clock-latency-ns = <150000>;
> +		};
> +
> +		opp-1200000000 {
> +			opp-hz = /bits/ 64 <1200000000>;
> +			opp-microvolt = <1100000>;
> +			clock-latency-ns = <150000>;
> +			opp-suspend;
> +		};
> +	};
> +
> +	gic: interrupt-controller@51a00000 {
> +		compatible = "arm,gic-v3";
> +		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
> +		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
> +		#interrupt-cells = <3>;
> +		interrupt-controller;
> +		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		dsp_reserved: dsp@92400000 {
> +			reg = <0 0x92400000 0 0x2000000>;
> +			no-map;
> +		};
> +	};
> +
> +	pmu {
> +		compatible = "arm,armv8-pmuv3";
> +		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	scu {

Please replace "scu {" with "system-controller {".

> +		compatible = "fsl,imx-scu";
> +		mbox-names = "tx0",
> +			     "rx0",
> +			     "gip3";
> +		mboxes = <&lsio_mu1 0 0
> +			  &lsio_mu1 1 0
> +			  &lsio_mu1 3 3>;
> +
> +		pd: power-controller {
> +			compatible = "fsl,scu-pd";
> +			#power-domain-cells = <1>;
> +			wakeup-irq = <160 163 235 236 237 228 229 230 231 238
> +				     239 240 166 169>;
> +		};
> +
> +		clk: clock-controller {
> +			compatible = "fsl,imx8dxl-clk", "fsl,scu-clk";
> +			#clock-cells = <2>;
> +			clocks = <&xtal32k &xtal24m>;
> +			clock-names = "xtal_32KHz", "xtal_24Mhz";
> +		};
> +
> +		iomuxc: pinctrl {
> +			compatible = "fsl,imx8dxl-iomuxc";
> +		};
> +
> +		ocotp: ocotp {
> +			compatible = "fsl,imx8qxp-scu-ocotp";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			fec_mac0: mac@2c4 {
> +				reg = <0x2c4 6>;
> +			};
> +
> +			fec_mac1: mac@2c6 {
> +				reg = <0x2c6 6>;
> +			};
> +		};
> +
> +		rtc: rtc {
> +			compatible = "fsl,imx8qxp-sc-rtc";
> +		};
> +
> +		sc_pwrkey: keys {
> +			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
> +			linux,keycode = <KEY_POWER>;
> +			wakeup-source;
> +		};
> +
> +		watchdog {
> +			compatible = "fsl,imx-sc-wdt";
> +			timeout-sec = <60>;
> +		};
> +
> +		tsens: thermal-sensor {
> +			compatible = "fsl,imx-sc-thermal";
> +			#thermal-sensor-cells = <1>;
> +		};
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
> +			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
> +			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
> +			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
> +	};
> +
> +	thermal_zones: thermal-zones {
> +		cpu-thermal0 {
> +			polling-delay-passive = <250>;
> +			polling-delay = <2000>;
> +			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
> +
> +			trips {
> +				cpu_alert0: trip0 {
> +					temperature = <107000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +				cpu_crit0: trip1 {
> +					temperature = <127000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_alert0>;
> +					cooling-device =
> +					<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +					<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +		};
> +	};
> +
> +	/* The two values below cannot be changed by the board */
> +	xtal32k: clock-xtal32k {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		clock-output-names = "xtal_32KHz";
> +	};
> +
> +	xtal24m: clock-xtal24m {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal_24MHz";
> +	};
> +
> +	/* sorted in register address */
> +	#include "imx8-ss-adma.dtsi"
> +	#include "imx8-ss-conn.dtsi"
> +	#include "imx8-ss-ddr.dtsi"
> +	#include "imx8-ss-lsio.dtsi"
> +};
> +
> +#include "imx8dxl-ss-adma.dtsi"
> +#include "imx8dxl-ss-conn.dtsi"
> +#include "imx8dxl-ss-lsio.dtsi"
> +#include "imx8dxl-ss-ddr.dtsi"
> -- 
> 2.25.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux