> -----Original Message-----
> From: Sean Anderson <sean.anderson@xxxxxxxx>
> Sent: Monday, July 25, 2022 23:02
> To: Camelia Alexandra Groza <camelia.groza@xxxxxxx>; David S . Miller
> <davem@xxxxxxxxxxxxx>; Jakub Kicinski <kuba@xxxxxxxxxx>; Madalin Bucur
> <madalin.bucur@xxxxxxx>; netdev@xxxxxxxxxxxxxxx
> Cc: Paolo Abeni <pabeni@xxxxxxxxxx>; Eric Dumazet
> <edumazet@xxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Russell
> King <linux@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx; Kishon Vijay
> Abraham I <kishon@xxxxxx>; Krzysztof Kozlowski
> <krzysztof.kozlowski+dt@xxxxxxxxxx>; Leo Li <leoyang.li@xxxxxxx>; Rob
> Herring <robh+dt@xxxxxxxxxx>; Shawn Guo <shawnguo@xxxxxxxxxx>; Vinod
> Koul <vkoul@xxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-
> phy@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH net-next v3 46/47] arm64: dts: ls1046ardb: Add serdes
> bindings
>
>
>
> On 7/22/22 8:41 AM, Camelia Alexandra Groza wrote:
> >> -----Original Message-----
> >> From: Sean Anderson <sean.anderson@xxxxxxxx>
> >> Sent: Thursday, July 21, 2022 18:41
> >> To: Camelia Alexandra Groza <camelia.groza@xxxxxxx>; David S . Miller
> >> <davem@xxxxxxxxxxxxx>; Jakub Kicinski <kuba@xxxxxxxxxx>; Madalin
> Bucur
> >> <madalin.bucur@xxxxxxx>; netdev@xxxxxxxxxxxxxxx
> >> Cc: Paolo Abeni <pabeni@xxxxxxxxxx>; Eric Dumazet
> >> <edumazet@xxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; Russell
> >> King <linux@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx; Kishon Vijay
> >> Abraham I <kishon@xxxxxx>; Krzysztof Kozlowski
> >> <krzysztof.kozlowski+dt@xxxxxxxxxx>; Leo Li <leoyang.li@xxxxxxx>; Rob
> >> Herring <robh+dt@xxxxxxxxxx>; Shawn Guo <shawnguo@xxxxxxxxxx>;
> Vinod
> >> Koul <vkoul@xxxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-
> >> phy@xxxxxxxxxxxxxxxxxxx
> >> Subject: Re: [PATCH net-next v3 46/47] arm64: dts: ls1046ardb: Add
> serdes
> >> bindings
> >>
> >>
> >>
> >> On 7/21/22 10:20 AM, Camelia Alexandra Groza wrote:
> >> >> -----Original Message-----
> >> >> From: Sean Anderson <sean.anderson@xxxxxxxx>
> >> >> Sent: Saturday, July 16, 2022 1:00
> >> >> To: David S . Miller <davem@xxxxxxxxxxxxx>; Jakub Kicinski
> >> >> <kuba@xxxxxxxxxx>; Madalin Bucur <madalin.bucur@xxxxxxx>;
> >> >> netdev@xxxxxxxxxxxxxxx
> >> >> Cc: Paolo Abeni <pabeni@xxxxxxxxxx>; Eric Dumazet
> >> >> <edumazet@xxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> Russell
> >> >> King <linux@xxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx; Sean
> >> Anderson
> >> >> <sean.anderson@xxxxxxxx>; Kishon Vijay Abraham I
> <kishon@xxxxxx>;
> >> >> Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>; Leo Li
> >> >> <leoyang.li@xxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Shawn
> Guo
> >> >> <shawnguo@xxxxxxxxxx>; Vinod Koul <vkoul@xxxxxxxxxx>;
> >> >> devicetree@xxxxxxxxxxxxxxx; linux-phy@xxxxxxxxxxxxxxxxxxx
> >> >> Subject: [PATCH net-next v3 46/47] arm64: dts: ls1046ardb: Add serdes
> >> >> bindings
> >> >>
> >> >> This adds appropriate bindings for the macs which use the SerDes. The
> >> >> 156.25MHz fixed clock is a crystal. The 100MHz clocks (there are
> >> >> actually 3) come from a Renesas 6V49205B at address 69 on i2c0. There
> is
> >> >> no driver for this device (and as far as I know all you can do with the
> >> >> 100MHz clocks is gate them), so I have chosen to model it as a single
> >> >> fixed clock.
> >> >>
> >> >> Note: the SerDes1 lane numbering for the LS1046A is *reversed*.
> >> >> This means that Lane A (what the driver thinks is lane 0) uses pins
> >> >> SD1_TX3_P/N.
> >> >>
> >> >> Because this will break ethernet if the serdes is not enabled, enable
> >> >> the serdes driver by default on Layerscape.
> >> >>
> >> >> Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxx>
> >> >> ---
> >> >> Please let me know if there is a better/more specific config I can use
> >> >> here.
> >> >>
> >> >> (no changes since v1)
> >> >
> >> > My LS1046ARDB hangs at boot with this patch right after the second
> SerDes
> >> is probed,
> >> > right before the point where the PCI host bridge is registered. I can get
> >> around this
> >> > either by disabling the second SerDes node from the device tree, or
> >> disabling
> >> > CONFIG_PCI_LAYERSCAPE at build.
> >> >
> >> > I haven't debugged it more but there seems to be an issue here.
> >>
> >> Hm. Do you have anything plugged into the PCIe/SATA slots? I haven't
> been
> >> testing with
> >> anything there. For now, it may be better to just leave it disabled.
> >>
> >> --Sean
> >
> > Yes, I have an Intel e1000 card plugged in.
> >
> > Camelia
> >
>
> Can you try the following patch? I was able to boot with PCI with it applied.
Works for me as well. The board boots fine and the PCI card is functional. Thanks.
> From 71f4136f1bdda89009936a9c24561b60e0554859 Mon Sep 17 00:00:00
> 2001
> From: Sean Anderson <sean.anderson@xxxxxxxx>
> Date: Mon, 25 Jul 2022 16:01:16 -0400
> Subject: [PATCH] arm64: dts: ls1046a: Fix missing PCIe lane
>
> Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> index 0b3765cad383..3841ba274782 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> @@ -532,7 +532,7 @@ pcie-0 {
> /* PCIe.1 x1 */
> cfg-1 {
> fsl,cfg = <0x1>;
> - fsl,first-lane = <1>;
> + fsl,first-lane = <0>;
> };
>
> /* PCIe.1 x4 */
> @@ -543,6 +543,14 @@ cfg-3 {
> };
> };
>
> + /* PCIe.2 x1 */
> + pcie-1 {
> + fsl,index = <1>;
> + fsl,proto = "pcie";
> + fsl,cfg = <0x1>;
> + fsl,first-lane = <1>;
> + };
> +
> pcie-2 {
> fsl,index = <2>;
> fsl,proto = "pcie";
> --
> 2.35.1.1320.gc452695387.dirty
