Add TPS65219 PMIC bindings using json-schema. Describe required properties and regname-supply. regname-supply is required when bypass mode is used for a regulator. Describes regulator topology. Interrupts support. Add a power-button property to configure the EN/PB/VSENSE pin as a powerbutton: TPS65219 has a multipurpose pin called EN/PB/VSENSE that can be either: - EN in which case it functions as an enable pin. - VSENSE which compares the voltages and triggers an automatic on/off request. - PB in which case it can be configured to trigger an interrupt to the SoC. ti,power-button reflects the last one of those options where the board has a button wired to the pin and triggers an interrupt on pressing it. Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> Signed-off-by: Jerome Neanne <jneanne@xxxxxxxxxxxx> --- .../bindings/regulator/ti,tps65219.yaml | 164 ++++++++++++++++++ 1 file changed, 164 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/ti,tps65219.yaml diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml new file mode 100644 index 000000000000..8fca4db6c64c --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/ti,tps65219.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI tps65219 Power Management Integrated Circuit regulators + +maintainers: + - Jerome Neanne <jerome.neanne@xxxxxxxxxxxx> + +description: | + Regulator nodes should be named to buck<number> and ldo<number>. + +properties: + compatible: + enum: + - ti,tps65219 + + reg: + maxItems: 1 + + system-power-controller: + type: boolean + description: Optional property that indicates that this device is + controlling system power. + + interrupts: + description: Short-circuit, over-current, under-voltage for regulators, PB interrupts. + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: Specifies the PIN numbers and Flags, as defined in + include/dt-bindings/interrupt-controller/irq.h + const: 1 + + power-button: + type: boolean + description: Optional property that sets the EN/PB/VSENSE pin to be a + power-button. + +patternProperties: + "^buck[1-3]-supply$": + description: Input supply phandle of one regulator. + + "^ldo[1-4]-supply$": + description: Input supply phandle of one regulator. + + regulators: + type: object + description: | + list of regulators provided by this controller + + patternProperties: + "^ldo[1-4]$": + type: object + $ref: regulator.yaml# + description: + Properties for single LDO regulator. + + unevaluatedProperties: false + + "^buck[1-3]$": + type: object + $ref: regulator.yaml# + description: + Properties for single BUCK regulator. + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tps65219: pmic@30 { + compatible = "ti,tps65219"; + reg = <0x30>; + buck1-supply = <&vcc_3v3_sys>; + buck2-supply = <&vcc_3v3_sys>; + buck3-supply = <&vcc_3v3_sys>; + ldo1-supply = <&vcc_3v3_sys>; + ldo2-supply = <&buck2_reg>; + ldo3-supply = <&vcc_3v3_sys>; + ldo4-supply = <&vcc_3v3_sys>; + + pinctrl-0 = <&pmic_irq_pins_default>; + + interrupt-parent = <&gic500>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + buck1_reg: buck1 { + regulator-name = "VDD_CORE"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-boot-on; + regulator-always-on; + }; + + buck2_reg: buck2 { + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + buck3_reg: buck3 { + regulator-name = "VDD_LPDDR4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-name = "VDDSHV_SD_IO_PMIC"; + regulator-min-microvolt = <33000000>; + regulator-max-microvolt = <33000000>; + }; + + ldo2_reg: ldo2 { + regulator-name = "VDDAR_CORE"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ldo3 { + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <18000000>; + regulator-max-microvolt = <18000000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ldo4 { + regulator-name = "VDD_PHY_2V5"; + regulator-min-microvolt = <25000000>; + regulator-max-microvolt = <25000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; -- 2.17.1
