From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> This board uses the pin as a power-button, enable it. Needed for driver testing but official board support pending. TI commitment is required before board upstream kick-off. Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> Signed-off-by: Jerome Neanne <jneanne@xxxxxxxxxxxx> --- arch/arm64/boot/dts/ti/k3-am642-sk.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts index 7a84223406f5..d789fb7c2162 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts @@ -348,8 +348,7 @@ pinctrl-0 = <&pmic_irq_pins_default>; interrupt-parent = <&gic500>; interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; + power-button; buck1-supply = <&vcc_3v3_sys>; buck2-supply = <&vcc_3v3_sys>; -- 2.17.1
