Re: [PATCH v14 01/10] dt-bindings: mediatek,dp: Add Display Port binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 2022-07-26 at 14:18 +0800, Rex-BC Chen wrote:
> On Wed, 2022-07-13 at 15:56 +0800, CK Hu wrote:
> > Hi, Bo-Chen:
> > 
> > On Tue, 2022-07-12 at 19:12 +0800, Bo-Chen Chen wrote:
> > > From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> > > 
> > > This controller is present on several mediatek hardware.
> > > Currently
> > > mt8195 and mt8395 have this controller without a functional
> > > difference,
> > > so only one compatible field is added.
> > > 
> > > The controller can have two forms, as a normal display port and
> > > as
> > > an
> > > embedded display port.
> > > 
> > > Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> > > Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
> > > Signed-off-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx>
> > > ---
> > >  .../display/mediatek/mediatek,dp.yaml         | 115
> > > ++++++++++++++++++
> > >  1 file changed, 115 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/display/mediatek/mediatek,dp.ya
> > > ml
> > > 
> > > diff --git
> > > a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.
> > > ya
> > > ml
> > > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.
> > > ya
> > > ml
> > > new file mode 100644
> > > index 000000000000..e2d6cb314297
> > > --- /dev/null
> > > +++
> > > b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.
> > > ya
> > > ml
> > > @@ -0,0 +1,115 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: 
> > > http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: MediaTek Display Port Controller
> > > +
> > > +maintainers:
> > > +  - Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx>
> > > +  - Jitao shi <jitao.shi@xxxxxxxxxxxx>
> > > +
> > > +description: |
> > > +  Device tree bindings for the MediaTek display port TX (DP) and
> > > +  embedded display port TX (eDP) controller present on some
> > > MediaTek
> > > SoCs.
> > > +  MediaTek DP and eDP are different hardwares and they have
> > > different
> > > +  base address for registers, so we need two different
> > > compatibles
> > > to
> > > +  separate them.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - mediatek,mt8195-dp-tx
> > > +      - mediatek,mt8195-edp-tx
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  nvmem-cells:
> > > +    maxItems: 1
> > > +    description: efuse data for display port calibration
> > > +
> > > +  nvmem-cell-names:
> > > +    const: dp_calibration_data
> > > +
> > > +  power-domains:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  ports:
> > > +    $ref: /schemas/graph.yaml#/properties/ports
> > > +    properties:
> > > +      port@0:
> > > +        $ref: /schemas/graph.yaml#/properties/port
> > > +        description: Input endpoint of the controller, usually
> > > dp_intf
> > > +
> > > +      port@1:
> > > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > > +        unevaluatedProperties: false
> > > +        description: Output endpoint of the controller
> > > +        properties:
> > > +          endpoint:
> > > +            $ref: /schemas/media/video-interfaces.yaml#
> > > +            unevaluatedProperties: false
> > > +            properties:
> > > +              data-lanes:
> > > +                description: |
> > > +                  number of lanes supported by the hardware.
> > > +                  The possible values:
> > > +                  0       - For 1 lane enabled in IP.
> > > +                  0 1     - For 2 lanes enabled in IP.
> > > +                  0 1 2 3 - For 4 lanes enabled in IP.
> > > +                minItems: 1
> > > +                maxItems: 4
> > > +            required:
> > > +              - data-lanes
> > > +
> > > +    required:
> > > +      - port@0
> > > +      - port@1
> > > +
> > > +  max-linkrate-mhz:
> > > +    enum: [ 1620, 2700, 5400, 8100 ]
> > > +    description: maximum link rate supported by the hardware.
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - interrupts
> > > +  - ports
> > > +  - max-linkrate-mhz
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > > +    #include <dt-bindings/power/mt8195-power.h>
> > > +    dp_tx@1c600000 {
> > > +        compatible = "mediatek,mt8195-dp-tx";
> > > +        reg = <0x1c600000 0x8000>;
> > > +        power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>;
> > > +        interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>;
> > > +        max-linkrate-mhz = <8100>;
> > 
> > Why dp-tx has no clock property? I think this device should work
> > with
> > a
> > clock.
> > 
> > Regards,
> > CK
> > 
> 
> Hello CK,
> 
> We just need to enable the power domain of dp.
> The clock of dp is generated by itself and we are not using the
> global
> pll to generate clocks.

Add this to description because this is not trivial.

Regards,
CK

> 
> BRs,
> Bo-Chen
> 
> > > +
> > > +        ports {
> > > +            #address-cells = <1>;
> > > +            #size-cells = <0>;
> > > +
> > > +            port@0 {
> > > +                reg = <0>;
> > > +                dptx_in: endpoint {
> > > +                    remote-endpoint = <&dp_intf0_out>;
> > > +                };
> > > +            };
> > > +            port@1 {
> > > +                reg = <1>;
> > > +                dptx_out: endpoint {
> > > +                    data-lanes = <0 1 2 3>;
> > > +                };
> > > +            };
> > > +        };
> > > +    };
> > 
> > 
> 
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux