On 26/07/2022 02:04, Dongjin Yang wrote: > > On 14/07/2022 04:28, Krzysztof Kozlowski wrote: >> On 13/07/2022 06:55, Dongjin Yang wrote: >>> Introduce a driver to provide calls into secure monitor mode. >>> This driver is used for SoCs produced by Samsung Foundry to provide >>> SMC call. This patch supports register read/write request to secure >>> monitor. Also, SMC call request which uses shared memory to exchange >>> the data between kernel and secure monitor. >>> >>> Signed-off-by: Dongjin Yang <dj76.yang@xxxxxxxxxxx> >>> --- >>> MAINTAINERS | 2 + >>> drivers/firmware/Kconfig | 11 +++ >>> drivers/firmware/Makefile | 1 + >>> drivers/firmware/samsung-smc-svc.c | 154 +++++++++++++++++++++++++++++++ >>> include/linux/firmware/samsung-smc-svc.h | 59 ++++++++++++ >>> 5 files changed, 227 insertions(+) >>> create mode 100644 drivers/firmware/samsung-smc-svc.c >>> create mode 100644 include/linux/firmware/samsung-smc-svc.h >>> >>> diff --git a/MAINTAINERS b/MAINTAINERS >>> index 6763746c349f..d173043ffb46 100644 >>> --- a/MAINTAINERS >>> +++ b/MAINTAINERS >>> @@ -1868,8 +1868,10 @@ F: arch/arm/boot/dts/artpec6* >>> F: arch/arm/mach-artpec >>> F: drivers/clk/axis >>> F: drivers/crypto/axis >>> +F: drivers/firmware/samsung-smc-svc.c >>> F: drivers/mmc/host/usdhi6rol0.c >>> F: drivers/pinctrl/pinctrl-artpec* >>> +F: include/linux/firmware/samsung-smc-svc.h >> >> Same as for bindings - not related to Artpec platforms. Either add >> dedicated entry or put it under Samsung SoC. >> > > This patch is for Artpec8 SoC. This does not answer my comment at all. > Best regards, Krzysztof
