Re: [PATCH v2 3/4] soc: mediatek: add support of MTK_SCPD_STRICT_BUSP cap

[AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>]

Il 25/07/22 10:18, Markus Schneider-Pargmann ha scritto:
> From: Alexandre Bailon <abailon@xxxxxxxxxxxx>
>
> This adds support for MTK_SCPD_STRICT_BUSP capability. It is a strict
> bus protection policy that requires the bus protection to be disabled
> before accessing the bus.
> This is required by the mt8365, for the MM power domain.
>
> Signed-off-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
> Signed-off-by: Fabien Parent <fparent@xxxxxxxxxxxx>
> Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> ---
>
> Notes:
>      Changes in v2:
>      - Fixup error handling path.
>
>   drivers/soc/mediatek/mtk-pm-domains.c | 29 +++++++++++++++++++++++----
>   drivers/soc/mediatek/mtk-pm-domains.h |  1 +
>   2 files changed, 26 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
> index d0eae2227813..94ca8981f45e 100644
> --- a/drivers/soc/mediatek/mtk-pm-domains.c
> +++ b/drivers/soc/mediatek/mtk-pm-domains.c
> @@ -240,6 +240,7 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
>   	struct scpsys *scpsys = pd->scpsys;
>   	bool tmp;
>   	int ret;
> +	bool strict_busprotect;
>   
>   	ret = scpsys_regulator_enable(pd->supply);
>   	if (ret)
> @@ -263,9 +264,18 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
>   	regmap_clear_bits(scpsys->base, pd->data->ctl_offs, PWR_ISO_BIT);
>   	regmap_set_bits(scpsys->base, pd->data->ctl_offs, PWR_RST_B_BIT);
>   
> -	ret = clk_bulk_prepare_enable(pd->num_subsys_clks, pd->subsys_clks);
> -	if (ret)
> -		goto err_pwr_ack;
> +	/*
> +	 * In few Mediatek platforms(e.g. MT6779), the bus protect policy is
> +	 * stricter, which leads to bus protect release must be prior to bus
> +	 * access.
> +	 */
> +	strict_busprotect = MTK_SCPD_CAPS(pd, MTK_SCPD_STRICT_BUSP);
> +	if (!strict_busprotect) {

Please directly check for MTK_SCPD_CAPS, you don't really need that bool variable,
not even for performance... and it fits just fine in one line, even.

	if (!MTK_SCPD_CAPS(pd, MTK_SCPD_STRICT_BUS_PROTECTION)) {

> +		ret = clk_bulk_prepare_enable(pd->num_subsys_clks,
> +					      pd->subsys_clks);
> +		if (ret)
> +			goto err_pwr_ack;
> +	}
>   
>   	ret = scpsys_sram_enable(pd);
>   	if (ret < 0)
> @@ -275,12 +285,23 @@ static int scpsys_power_on(struct generic_pm_domain *genpd)
>   	if (ret < 0)
>   		goto err_disable_sram;
>   
> +	if (strict_busprotect) {

	if (MTK_SCPD_CAPS(pd, MTK_SCPD_STRICT_BUS_PROTECTION)) {

> +		ret = clk_bulk_prepare_enable(pd->num_subsys_clks,
> +					      pd->subsys_clks);
> +		if (ret)
> +			goto err_enable_bus_protect;
> +	}
> +
>   	return 0;
>   
> +err_enable_bus_protect:

For human readability purposes (and paranoidly preventing future mistakes), I'd
add a check for the strict bus protection cap here too.

> +	scpsys_bus_protect_enable(pd);
>   err_disable_sram:
>   	scpsys_sram_disable(pd);
>   err_disable_subsys_clks:
> -	clk_bulk_disable_unprepare(pd->num_subsys_clks, pd->subsys_clks);
> +	if (!strict_busprotect)
> +		clk_bulk_disable_unprepare(pd->num_subsys_clks,
> +					   pd->subsys_clks);
>   err_pwr_ack:
>   	clk_bulk_disable_unprepare(pd->num_clks, pd->clks);
>   err_reg:
> diff --git a/drivers/soc/mediatek/mtk-pm-domains.h b/drivers/soc/mediatek/mtk-pm-domains.h
> index e788d6bdde9d..a50cfb926d22 100644
> --- a/drivers/soc/mediatek/mtk-pm-domains.h
> +++ b/drivers/soc/mediatek/mtk-pm-domains.h
> @@ -8,6 +8,7 @@
>   #define MTK_SCPD_SRAM_ISO		BIT(2)
>   #define MTK_SCPD_KEEP_DEFAULT_OFF	BIT(3)
>   #define MTK_SCPD_DOMAIN_SUPPLY		BIT(4)
> +#define MTK_SCPD_STRICT_BUSP		BIT(5)

MTK_SCPD_STRICT_BUS_PROTECTION is a bit more human readable.

>   #define MTK_SCPD_CAPS(_scpd, _x)	((_scpd)->data->caps & (_x))
>   
>   #define SPM_VDE_PWR_CON			0x0210

Regards,
Angelo