[PATCH v7 4/5] arm64: dts: qcom: msm8916-samsung-e2015: Add touchkey

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On the Samsung Galaxy E5 and E7 the touch key is supplied by a single
fixed regulator (enabled via GPIO 97) that supplies both MCU and LED.
Add it to the device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@xxxxxxxxxxxxxx>
---
 .../qcom/msm8916-samsung-e2015-common.dtsi    | 26 +++++++++++++++++++
 .../dts/qcom/msm8916-samsung-grandmax.dts     |  4 +++
 2 files changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
index 9caa8a161d31..542010fdfb8a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi
@@ -38,6 +38,19 @@ reg_motor_vdd: regulator-motor-vdd {
 		pinctrl-names = "default";
 		pinctrl-0 = <&motor_en_default>;
 	};
+
+	reg_touch_key: regulator-touch-key {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_key";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tkey_en_default>;
+	};
 };

 &blsp_i2c2 {
@@ -48,6 +61,11 @@ &blsp_i2c2 {
 	/delete-node/ magnetometer@12;
 };

+&touchkey {
+	vcc-supply = <&reg_touch_key>;
+	vdd-supply = <&reg_touch_key>;
+};
+
 &msmgpio {
 	motor_en_default: motor-en-default {
 		pins = "gpio76";
@@ -56,4 +74,12 @@ motor_en_default: motor-en-default {
 		drive-strength = <2>;
 		bias-disable;
 	};
+
+	tkey_en_default: tkey-en-default {
+		pins = "gpio97";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
index 4c1becdb9428..bc7134698978 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dts
@@ -41,6 +41,10 @@ &reg_motor_vdd {
 	gpio = <&msmgpio 72 GPIO_ACTIVE_HIGH>;
 };

+&reg_touch_key {
+	status = "disabled";
+};
+
 &msmgpio {
 	gpio_leds_default: gpio-led-default {
 		pins = "gpio60";
--
2.30.2






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux