On Fri, Jul 22, 2022 at 08:02:32PM +0530, Parikshit Pareek wrote:
> There are many ADP boards with lot of common features. Move common
> nodes to sa8xxxp-auto.dtsi files. This will be base for many ADP boards
> to be introduced in near future.
>
> Signed-off-by: Parikshit Pareek <quic_ppareek@xxxxxxxxxxx>
> ---
>
> Changes since v1:
> - Add , after year 2022, in the license header
> - Rename the dtsi which is suitable for common to many ADP boards
> - Split the patch in introducing common dtsi file, and adding new board
> file
>
> arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 378 +----------------
> .../arm64/boot/dts/qcom/sa8xxxp-auto-adp.dtsi | 385 ++++++++++++++++++
Is this maybe too broad of a name? Outside of sa8295p/sa8540p inheriting
from sc8280xp, you've got sa8155p inheriting from sm8150 and sa8195p
inheriting from sc8180xp (may have butchered some of the suffixes there
but you get the point). I know for sure that sa8155p/sa8195p are
"auto-adp" boards so the sa8xxxp-auto-adp.dtsi might cause confusion.
If I was looking I'd expect that dtsi to be relevant to them as well
based on the name, but it isn't as far as I can tell.
By the way, I plan on taking these for a spin on the qdrive3 board I
have when I get access to it again (today/monday), so feel free to cc
me on new versions!
Thanks,
Andrew
> 2 files changed, 387 insertions(+), 376 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sa8xxxp-auto-adp.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> index 9398f0349944..3cc92162ba02 100644
> --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
> @@ -2,388 +2,14 @@
> /*
> * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> * Copyright (c) 2022, Linaro Limited
> + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
> */
>
> /dts-v1/;
>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> -#include <dt-bindings/spmi/spmi.h>
> -
> -#include "sa8540p.dtsi"
> +#include "sa8xxxp-auto-adp.dtsi"
>
> / {
> model = "Qualcomm SA8295P ADP";
> compatible = "qcom,sa8295p-adp", "qcom,sa8540p";
> -
> - aliases {
> - serial0 = &qup2_uart17;
> - };
> -
> - chosen {
> - stdout-path = "serial0:115200n8";
> - };
> -};
> -
> -&apps_rsc {
> - pmm8540-a-regulators {
> - compatible = "qcom,pm8150-rpmh-regulators";
> - qcom,pmic-id = "a";
> -
> - vreg_l3a: ldo3 {
> - regulator-name = "vreg_l3a";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1208000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> -
> - vreg_l5a: ldo5 {
> - regulator-name = "vreg_l5a";
> - regulator-min-microvolt = <912000>;
> - regulator-max-microvolt = <912000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> -
> - vreg_l7a: ldo7 {
> - regulator-name = "vreg_l7a";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> -
> - vreg_l13a: ldo13 {
> - regulator-name = "vreg_l13a";
> - regulator-min-microvolt = <3072000>;
> - regulator-max-microvolt = <3072000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> - };
> -
> - pmm8540-c-regulators {
> - compatible = "qcom,pm8150-rpmh-regulators";
> - qcom,pmic-id = "c";
> -
> - vreg_l1c: ldo1 {
> - regulator-name = "vreg_l1c";
> - regulator-min-microvolt = <912000>;
> - regulator-max-microvolt = <912000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> -
> - vreg_l2c: ldo2 {
> - regulator-name = "vreg_l2c";
> - regulator-min-microvolt = <3072000>;
> - regulator-max-microvolt = <3072000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> -
> - vreg_l3c: ldo3 {
> - regulator-name = "vreg_l3c";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> -
> - vreg_l4c: ldo4 {
> - regulator-name = "vreg_l4c";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1208000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> -
> - vreg_l6c: ldo6 {
> - regulator-name = "vreg_l6c";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> -
> - vreg_l7c: ldo7 {
> - regulator-name = "vreg_l7c";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> -
> - vreg_l10c: ldo10 {
> - regulator-name = "vreg_l10c";
> - regulator-min-microvolt = <2504000>;
> - regulator-max-microvolt = <2504000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> -
> - vreg_l17c: ldo17 {
> - regulator-name = "vreg_l17c";
> - regulator-min-microvolt = <2504000>;
> - regulator-max-microvolt = <2504000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> - };
> -
> - pmm8540-g-regulators {
> - compatible = "qcom,pm8150-rpmh-regulators";
> - qcom,pmic-id = "g";
> -
> - vreg_l3g: ldo3 {
> - regulator-name = "vreg_l3g";
> - regulator-min-microvolt = <1200000>;
> - regulator-max-microvolt = <1200000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> -
> - vreg_l7g: ldo7 {
> - regulator-name = "vreg_l7g";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <1800000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> -
> - vreg_l8g: ldo8 {
> - regulator-name = "vreg_l8g";
> - regulator-min-microvolt = <880000>;
> - regulator-max-microvolt = <880000>;
> - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> - regulator-allow-set-load;
> - };
> - };
> -};
> -
> -&qup2 {
> - status = "okay";
> -};
> -
> -&qup2_uart17 {
> - compatible = "qcom,geni-debug-uart";
> - status = "okay";
> -};
> -
> -&remoteproc_adsp {
> - firmware-name = "qcom/sa8540p/adsp.mbn";
> - status = "okay";
> -};
> -
> -&remoteproc_nsp0 {
> - firmware-name = "qcom/sa8540p/cdsp.mbn";
> - status = "okay";
> -};
> -
> -&remoteproc_nsp1 {
> - firmware-name = "qcom/sa8540p/cdsp1.mbn";
> - status = "okay";
> -};
> -
> -&spmi_bus {
> - pm8450a: pmic@0 {
> - compatible = "qcom,pm8150", "qcom,spmi-pmic";
> - reg = <0x0 SPMI_USID>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - pm8450a_gpios: gpio@c000 {
> - compatible = "qcom,pm8150-gpio";
> - reg = <0xc000>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> - };
> -
> - pm8450c: pmic@4 {
> - compatible = "qcom,pm8150", "qcom,spmi-pmic";
> - reg = <0x4 SPMI_USID>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - pm8450c_gpios: gpio@c000 {
> - compatible = "qcom,pm8150-gpio";
> - reg = <0xc000>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> - };
> -
> - pm8450e: pmic@8 {
> - compatible = "qcom,pm8150", "qcom,spmi-pmic";
> - reg = <0x8 SPMI_USID>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - pm8450e_gpios: gpio@c000 {
> - compatible = "qcom,pm8150-gpio";
> - reg = <0xc000>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> - };
> -
> - pm8450g: pmic@c {
> - compatible = "qcom,pm8150", "qcom,spmi-pmic";
> - reg = <0xc SPMI_USID>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - pm8450g_gpios: gpio@c000 {
> - compatible = "qcom,pm8150-gpio";
> - reg = <0xc000>;
> - gpio-controller;
> - #gpio-cells = <2>;
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> - };
> -};
> -
> -&ufs_mem_hc {
> - reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
> -
> - vcc-supply = <&vreg_l17c>;
> - vcc-max-microamp = <800000>;
> - vccq-supply = <&vreg_l6c>;
> - vccq-max-microamp = <900000>;
> -
> - status = "okay";
> -};
> -
> -&ufs_mem_phy {
> - vdda-phy-supply = <&vreg_l8g>;
> - vdda-pll-supply = <&vreg_l3g>;
> -
> - status = "okay";
> };
> -
> -&ufs_card_hc {
> - reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;
> -
> - vcc-supply = <&vreg_l10c>;
> - vcc-max-microamp = <800000>;
> - vccq-supply = <&vreg_l3c>;
> - vccq-max-microamp = <900000>;
> -
> - status = "okay";
> -};
> -
> -&ufs_card_phy {
> - vdda-phy-supply = <&vreg_l8g>;
> - vdda-pll-supply = <&vreg_l3g>;
> -
> - status = "okay";
> -};
> -
> -&usb_0 {
> - status = "okay";
> -};
> -
> -&usb_0_dwc3 {
> - /* TODO: Define USB-C connector properly */
> - dr_mode = "peripheral";
> -};
> -
> -&usb_0_hsphy {
> - vdda-pll-supply = <&vreg_l5a>;
> - vdda18-supply = <&vreg_l7a>;
> - vdda33-supply = <&vreg_l13a>;
> -
> - status = "okay";
> -};
> -
> -&usb_0_qmpphy {
> - vdda-phy-supply = <&vreg_l3a>;
> - vdda-pll-supply = <&vreg_l5a>;
> -
> - status = "okay";
> -};
> -
> -&usb_1 {
> - status = "okay";
> -};
> -
> -&usb_1_dwc3 {
> - /* TODO: Define USB-C connector properly */
> - dr_mode = "host";
> -};
> -
> -&usb_1_hsphy {
> - vdda-pll-supply = <&vreg_l1c>;
> - vdda18-supply = <&vreg_l7c>;
> - vdda33-supply = <&vreg_l2c>;
> -
> - status = "okay";
> -};
> -
> -&usb_1_qmpphy {
> - vdda-phy-supply = <&vreg_l4c>;
> - vdda-pll-supply = <&vreg_l1c>;
> -
> - status = "okay";
> -};
> -
> -&usb_2_hsphy0 {
> - vdda-pll-supply = <&vreg_l5a>;
> - vdda18-supply = <&vreg_l7g>;
> - vdda33-supply = <&vreg_l13a>;
> -
> - status = "okay";
> -};
> -
> -&usb_2_hsphy1 {
> - vdda-pll-supply = <&vreg_l5a>;
> - vdda18-supply = <&vreg_l7g>;
> - vdda33-supply = <&vreg_l13a>;
> -
> - status = "okay";
> -};
> -
> -&usb_2_hsphy2 {
> - vdda-pll-supply = <&vreg_l5a>;
> - vdda18-supply = <&vreg_l7g>;
> - vdda33-supply = <&vreg_l13a>;
> -
> - status = "okay";
> -};
> -
> -&usb_2_hsphy3 {
> - vdda-pll-supply = <&vreg_l5a>;
> - vdda18-supply = <&vreg_l7g>;
> - vdda33-supply = <&vreg_l13a>;
> -
> - status = "okay";
> -};
> -
> -&usb_2_qmpphy0 {
> - vdda-phy-supply = <&vreg_l3a>;
> - vdda-pll-supply = <&vreg_l5a>;
> -
> - status = "okay";
> -};
> -
> -&usb_2_qmpphy1 {
> - vdda-phy-supply = <&vreg_l3a>;
> - vdda-pll-supply = <&vreg_l5a>;
> -
> - status = "okay";
> -};
> -
> -&xo_board_clk {
> - clock-frequency = <38400000>;
> -};
> -
> -/* PINCTRL */
> diff --git a/arch/arm64/boot/dts/qcom/sa8xxxp-auto-adp.dtsi b/arch/arm64/boot/dts/qcom/sa8xxxp-auto-adp.dtsi
> new file mode 100644
> index 000000000000..428e10f48481
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sa8xxxp-auto-adp.dtsi
> @@ -0,0 +1,385 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022, Linaro Limited
> + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
> +#include <dt-bindings/spmi/spmi.h>
> +
> +#include "sa8540p.dtsi"
> +
> +/ {
> + aliases {
> + serial0 = &qup2_uart17;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&apps_rsc {
> + pmm8540-a-regulators {
> + compatible = "qcom,pm8150-rpmh-regulators";
> + qcom,pmic-id = "a";
> +
> + vreg_l3a: ldo3 {
> + regulator-name = "vreg_l3a";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1208000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l5a: ldo5 {
> + regulator-name = "vreg_l5a";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l7a: ldo7 {
> + regulator-name = "vreg_l7a";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l13a: ldo13 {
> + regulator-name = "vreg_l13a";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> + };
> +
> + pmm8540-c-regulators {
> + compatible = "qcom,pm8150-rpmh-regulators";
> + qcom,pmic-id = "c";
> +
> + vreg_l1c: ldo1 {
> + regulator-name = "vreg_l1c";
> + regulator-min-microvolt = <912000>;
> + regulator-max-microvolt = <912000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l2c: ldo2 {
> + regulator-name = "vreg_l2c";
> + regulator-min-microvolt = <3072000>;
> + regulator-max-microvolt = <3072000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l3c: ldo3 {
> + regulator-name = "vreg_l3c";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l4c: ldo4 {
> + regulator-name = "vreg_l4c";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1208000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l6c: ldo6 {
> + regulator-name = "vreg_l6c";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l7c: ldo7 {
> + regulator-name = "vreg_l7c";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l10c: ldo10 {
> + regulator-name = "vreg_l10c";
> + regulator-min-microvolt = <2504000>;
> + regulator-max-microvolt = <2504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l17c: ldo17 {
> + regulator-name = "vreg_l17c";
> + regulator-min-microvolt = <2504000>;
> + regulator-max-microvolt = <2504000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> + };
> +
> + pmm8540-g-regulators {
> + compatible = "qcom,pm8150-rpmh-regulators";
> + qcom,pmic-id = "g";
> +
> + vreg_l3g: ldo3 {
> + regulator-name = "vreg_l3g";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l7g: ldo7 {
> + regulator-name = "vreg_l7g";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> +
> + vreg_l8g: ldo8 {
> + regulator-name = "vreg_l8g";
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <880000>;
> + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
> + regulator-allow-set-load;
> + };
> + };
> +};
> +
> +&qup2 {
> + status = "okay";
> +};
> +
> +&qup2_uart17 {
> + compatible = "qcom,geni-debug-uart";
> + status = "okay";
> +};
> +
> +&remoteproc_adsp {
> + firmware-name = "qcom/sa8540p/adsp.mbn";
> + status = "okay";
> +};
> +
> +&remoteproc_nsp0 {
> + firmware-name = "qcom/sa8540p/cdsp.mbn";
> + status = "okay";
> +};
> +
> +&remoteproc_nsp1 {
> + firmware-name = "qcom/sa8540p/cdsp1.mbn";
> + status = "okay";
> +};
> +
> +&spmi_bus {
> + pm8450a: pmic@0 {
> + compatible = "qcom,pm8150", "qcom,spmi-pmic";
> + reg = <0x0 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pm8450a_gpios: gpio@c000 {
> + compatible = "qcom,pm8150-gpio";
> + reg = <0xc000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + pm8450c: pmic@4 {
> + compatible = "qcom,pm8150", "qcom,spmi-pmic";
> + reg = <0x4 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pm8450c_gpios: gpio@c000 {
> + compatible = "qcom,pm8150-gpio";
> + reg = <0xc000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + pm8450e: pmic@8 {
> + compatible = "qcom,pm8150", "qcom,spmi-pmic";
> + reg = <0x8 SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pm8450e_gpios: gpio@c000 {
> + compatible = "qcom,pm8150-gpio";
> + reg = <0xc000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +
> + pm8450g: pmic@c {
> + compatible = "qcom,pm8150", "qcom,spmi-pmic";
> + reg = <0xc SPMI_USID>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pm8450g_gpios: gpio@c000 {
> + compatible = "qcom,pm8150-gpio";
> + reg = <0xc000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + };
> + };
> +};
> +
> +&ufs_mem_hc {
> + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
> +
> + vcc-supply = <&vreg_l17c>;
> + vcc-max-microamp = <800000>;
> + vccq-supply = <&vreg_l6c>;
> + vccq-max-microamp = <900000>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&vreg_l8g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +
> + status = "okay";
> +};
> +
> +&ufs_card_hc {
> + reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>;
> +
> + vcc-supply = <&vreg_l10c>;
> + vcc-max-microamp = <800000>;
> + vccq-supply = <&vreg_l3c>;
> + vccq-max-microamp = <900000>;
> +
> + status = "okay";
> +};
> +
> +&ufs_card_phy {
> + vdda-phy-supply = <&vreg_l8g>;
> + vdda-pll-supply = <&vreg_l3g>;
> +
> + status = "okay";
> +};
> +
> +&usb_0 {
> + status = "okay";
> +};
> +
> +&usb_0_dwc3 {
> + /* TODO: Define USB-C connector properly */
> + dr_mode = "peripheral";
> +};
> +
> +&usb_0_hsphy {
> + vdda-pll-supply = <&vreg_l5a>;
> + vdda18-supply = <&vreg_l7a>;
> + vdda33-supply = <&vreg_l13a>;
> +
> + status = "okay";
> +};
> +
> +&usb_0_qmpphy {
> + vdda-phy-supply = <&vreg_l3a>;
> + vdda-pll-supply = <&vreg_l5a>;
> +
> + status = "okay";
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + /* TODO: Define USB-C connector properly */
> + dr_mode = "host";
> +};
> +
> +&usb_1_hsphy {
> + vdda-pll-supply = <&vreg_l1c>;
> + vdda18-supply = <&vreg_l7c>;
> + vdda33-supply = <&vreg_l2c>;
> +
> + status = "okay";
> +};
> +
> +&usb_1_qmpphy {
> + vdda-phy-supply = <&vreg_l4c>;
> + vdda-pll-supply = <&vreg_l1c>;
> +
> + status = "okay";
> +};
> +
> +&usb_2_hsphy0 {
> + vdda-pll-supply = <&vreg_l5a>;
> + vdda18-supply = <&vreg_l7g>;
> + vdda33-supply = <&vreg_l13a>;
> +
> + status = "okay";
> +};
> +
> +&usb_2_hsphy1 {
> + vdda-pll-supply = <&vreg_l5a>;
> + vdda18-supply = <&vreg_l7g>;
> + vdda33-supply = <&vreg_l13a>;
> +
> + status = "okay";
> +};
> +
> +&usb_2_hsphy2 {
> + vdda-pll-supply = <&vreg_l5a>;
> + vdda18-supply = <&vreg_l7g>;
> + vdda33-supply = <&vreg_l13a>;
> +
> + status = "okay";
> +};
> +
> +&usb_2_hsphy3 {
> + vdda-pll-supply = <&vreg_l5a>;
> + vdda18-supply = <&vreg_l7g>;
> + vdda33-supply = <&vreg_l13a>;
> +
> + status = "okay";
> +};
> +
> +&usb_2_qmpphy0 {
> + vdda-phy-supply = <&vreg_l3a>;
> + vdda-pll-supply = <&vreg_l5a>;
> +
> + status = "okay";
> +};
> +
> +&usb_2_qmpphy1 {
> + vdda-phy-supply = <&vreg_l3a>;
> + vdda-pll-supply = <&vreg_l5a>;
> +
> + status = "okay";
> +};
> +
> +&xo_board_clk {
> + clock-frequency = <38400000>;
> +};
> +
> +/* PINCTRL */
> --
> 2.17.1
>
