Am Donnerstag, dem 21.07.2022 um 13:16 +0200 schrieb Ulf Hansson: > On Thu, 21 Jul 2022 at 06:37, Martin Kepplinger > <martin.kepplinger@xxxxxxx> wrote: > > > > If for example the power-domains' power-supply node (regulator) > > needs > > interrupts to work, the current setup with noirq callbacks cannot > > work; for example a pmic regulator on i2c, when suspending, usually > > already > > times out during suspend_noirq: > > > > [ 41.024193] buck4: failed to disable: -ETIMEDOUT > > > > So fix system suspend and resume for these power-domains by using > > the > > "outer" suspend/resume callbacks instead. Tested on the imx8mq- > > librem5 board, > > but by looking at the dts, this will fix imx8mq-evk and possibly > > many other > > boards too. > > > > This is designed so that genpd providers just say "this genpd needs > > interrupts" (by setting the flag) - without implying an > > implementation. > > > > Initially system suspend problems had been discussed at > > > > https://lore.kernel.org/linux-arm-kernel/20211002005954.1367653-8-l.stach@xxxxxxxxxxxxxx/ > > which led to discussing the pmic that contains the regulators which > > serve as power-domain power-supplies: > > > > https://lore.kernel.org/linux-pm/573166b75e524517782471c2b7f96e03fd93d175.camel@xxxxxxx/T/ > > > > Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx> > > --- > > drivers/base/power/domain.c | 13 +++++++++++++ > > include/linux/pm_domain.h | 5 +++++ > > 2 files changed, 18 insertions(+) > > > > diff --git a/drivers/base/power/domain.c > > b/drivers/base/power/domain.c > > index 5a2e0232862e..ef77700e0def 100644 > > --- a/drivers/base/power/domain.c > > +++ b/drivers/base/power/domain.c > > @@ -130,6 +130,7 @@ static const struct genpd_lock_ops > > genpd_spin_ops = { > > #define genpd_is_active_wakeup(genpd) (genpd->flags & > > GENPD_FLAG_ACTIVE_WAKEUP) > > #define genpd_is_cpu_domain(genpd) (genpd->flags & > > GENPD_FLAG_CPU_DOMAIN) > > #define genpd_is_rpm_always_on(genpd) (genpd->flags & > > GENPD_FLAG_RPM_ALWAYS_ON) > > +#define genpd_irq_on(genpd) (genpd->flags & > > GENPD_FLAG_IRQ_ON) > > > > static inline bool irq_safe_dev_in_sleep_domain(struct device > > *dev, > > const struct generic_pm_domain *genpd) > > @@ -2079,6 +2080,13 @@ int pm_genpd_init(struct generic_pm_domain > > *genpd, > > genpd->dev_ops.start = pm_clk_resume; > > } > > > > + if (genpd_irq_on(genpd)) { > > + genpd->domain.ops.suspend = genpd_suspend_noirq; > > + genpd->domain.ops.resume = genpd_resume_noirq; > > + genpd->domain.ops.suspend_noirq = NULL; > > + genpd->domain.ops.resume_noirq = NULL; > > Please move this a few lines above, just before we assign the _*noirq > callbacks. In this way you don't need to reset thosepointers. good point, thanks. > > > + } > > + > > /* The always-on governor works better with the > > corresponding flag. */ > > if (gov == &pm_domain_always_on_gov) > > genpd->flags |= GENPD_FLAG_RPM_ALWAYS_ON; > > @@ -2769,6 +2777,11 @@ static int __genpd_dev_pm_attach(struct > > device *dev, struct device *base_dev, > > goto err; > > dev_gpd_data(dev)->default_pstate = pstate; > > } > > + > > + if (pd->domain.ops.suspend_noirq && (pd->flags & > > GENPD_FLAG_IRQ_ON)) > > + dev_err(dev, "PM domain %s needs irqs but uses > > noirq suspend\n", > > + pd->name); > > + > > This doesn't make sense, as it can never happen according to what we > do in pm_genpd_init(). > > What Lucas suggested in the other thread was to log a warning if a > device's (that gets attached to genpd) bus/driver has _*noirq > callbacks. That would make sense. > > Thinking more about this, perhaps we should move to use the > _*late/early callbacks instead for genpd. This would decrease the > window of potential problematic consumers users (drivers/buses). > ok, I'll probably send another version without this. I'm leaving for vacations for a few weeks soon, so I'd rather do the essentials only here and take notes about what could be added later, if that's ok. thank you very much! martin > > return 1; > > > > err: > > diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h > > index 76bc9e3ef5ff..03bb86e43550 100644 > > --- a/include/linux/pm_domain.h > > +++ b/include/linux/pm_domain.h > > @@ -61,6 +61,10 @@ > > * GENPD_FLAG_MIN_RESIDENCY: Enable the genpd governor to > > consider its > > * components' next wakeup when > > determining the > > * optimal idle state. > > + * > > + * GENPD_FLAG_IRQ_ON: genpd needs irqs to be able to > > manage power > > + * on/off. Use the outer > > suspend/resume callbacks > > + * instead of noirq for example. > > */ > > #define GENPD_FLAG_PM_CLK BIT(0) > > #define GENPD_FLAG_IRQ_SAFE BIT(1) > > @@ -69,6 +73,7 @@ > > #define GENPD_FLAG_CPU_DOMAIN BIT(4) > > #define GENPD_FLAG_RPM_ALWAYS_ON BIT(5) > > #define GENPD_FLAG_MIN_RESIDENCY BIT(6) > > +#define GENPD_FLAG_IRQ_ON BIT(7) > > > > enum gpd_status { > > GENPD_STATE_ON = 0, /* PM domain is on */ > > -- > > 2.30.2 > > > > Kind regards > Uffe
