On Sun, Jul 17, 2022 at 10:46:43AM +0200, Pavel Machek wrote: > Hi! > > > The MediaTek MT6370 is a highly-integrated smart power management IC, > > which includes a single cell Li-Ion/Li-Polymer switching battery > > charger, a USB Type-C & Power Delivery (PD) controller, dual > > Flash LED current sources, a RGB LED driver, a backlight WLED driver, > > a display bias driver and a general LDO for portable devices. > > > > In MediaTek MT6370, there are four channel current-sink RGB LEDs that > > support hardware pattern for constant current, PWM, and breath mode. > > Isink4 channel can also be used as a CHG_VIN power good indicator. > > > > Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx> > > > index a49979f..71bacb5 100644 > > --- a/drivers/leds/Kconfig > > +++ b/drivers/leds/Kconfig > > @@ -244,6 +244,20 @@ config LEDS_MT6323 > > This option enables support for on-chip LED drivers found on > > Mediatek MT6323 PMIC. > > > > +config LEDS_MT6370_RGB > > + tristate "LED Support for MediaTek MT6370 PMIC" > > + depends on LEDS_CLASS > > + depends on MFD_MT6370 > > + select LINEAR_RANGE > > + help > > + Say Y here to enable support for MT6370_RGB LED device. > > + In MT6370, there are four channel current-sink LED drivers that > > + support hardware pattern for constant current, PWM, and breath mode. > > + Isink4 channel can also be used as a CHG_VIN power good > > Should this go to leds/rgb directory, and should it depend on > multicolor framework? Yes, and I may also want to change the file name from 'leds-mt6370' to 'leds-mt6370-rgb'. Is it ok? > > Best regards, > Pavel > -- > People of Russia, stop Putin before his war on Ukraine escalates.
