The main goal of this patchset is to remove platform data and replace it by firmware properties. Original discussion in [1]. While in here, some refactor was done to the driver. The most noticeable one is to replace the GPIs events handling by irqchip support so that this gpi keys can be "consumed" by the gpio-keys driver (also as suggested in [1]). With this, the gpio-adp5588 can be removed. This change comes first so that we can already remove some platform data variables making it easier to completly replace it by firmware properties further down in the series. As there's no users of the platform data, I just replace it in a single patch as there's no point in having support for both (even though it might be harder to review the patch as-is). Special note to the gpio-adp5588 driver removal. I'm aware of some changes to the driver in [2]. These changes are in the gpio tree and this patchset is naturally based on the input tree which means that patch 2 will not apply. So, I'm not really sure how to handle this. I guess in this case the conflict is easy to handle :) but just let me know on how to proceed in here if there's anything for me to do. [1]: https://lore.kernel.org/linux-input/20220504084617.36844-1-u.kleine-koenig@xxxxxxxxxxxxxx/ [2]: https://lore.kernel.org/linux-gpio/20220628193906.36350-3-andriy.shevchenko@xxxxxxxxxxxxxxx/ v2 changes: [1/10] * Turn hwirq signed so we can compare < 0; * Replace WARN_ON with dev_warn(); * Do not set of_node on gpiochip; * Moved to use a const irqchip within the gpiochip; * Set default handler to 'handle_bad_irq()' and change it in irq_set_type; [4/10] * Dropped "-keys" from compatible and added vendor prefix; * Fix -Wformat complains; * Don't use abbrev in comments (fw -> Firmware). [5/10] * Be consistent on $refs; * Drop "-keys" from compatible. [7/10] * Include bits.h; * Use GENMASK(); * Use BIT() in KP_SEL(); * Reflect code changes in the commit message. [9/10] * One line for regulator_disable action. v3 changes: [1/10] * Use 'irqd_to_hwirq()' helper; * Use INVALID_HWIRQ to signal hwirq not found; * Just compare irq against 0 in 'irq_find_mapping()'; * Renamed irq_data *desc to *irqd to avoid confusion. [5/10] * Dropped the -keys suffix on the filename; * Compatible enum in alphabetical order; * Improved 'adi,unlock-keys' description; * 4 spaces indentation for dts example; * Renamed device node to a generic name and fixed the compatible property in the example. Nuno Sá (10): input: keyboard: adp5588-keys: support gpi key events as 'gpio keys' gpio: gpio-adp5588: drop the driver input: keyboard: adp5588-keys: bail out on returned error input: keyboard: adp5588-keys: add support for fw properties dt-bindings: input: adp5588: add bindings input: keyboard: adp5588-keys: do not check for irq presence input: keyboard: adp5588-keys: fix coding style warnings input: keyboard: adp5588-keys: add optional reset gpio input: keyboard: adp5588-keys: add regulator support input: keyboard: adp5588-keys: Use new PM macros .../bindings/input/adi,adp5588.yaml | 111 +++ MAINTAINERS | 2 +- drivers/gpio/Kconfig | 14 - drivers/gpio/Makefile | 1 - drivers/gpio/gpio-adp5588.c | 452 ----------- drivers/input/keyboard/Kconfig | 3 + drivers/input/keyboard/adp5588-keys.c | 719 ++++++++++++------ include/linux/platform_data/adp5588.h | 171 ----- 8 files changed, 589 insertions(+), 884 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/adi,adp5588.yaml delete mode 100644 drivers/gpio/gpio-adp5588.c delete mode 100644 include/linux/platform_data/adp5588.h -- 2.37.1
