On Tue, Jul 19, 2022 at 11:17:31AM +0200, Jerome Neanne wrote:
> Add interrupt properties in PMIC TPS65219 bindings
Why is this a separate patch? Please make your binding complete. Where
do these interrupts go to?
>
> Signed-off-by: Jerome Neanne <jneanne@xxxxxxxxxxxx>
> ---
> .../bindings/regulator/ti,tps65219.yaml | 22 +++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml
> index 2c655432b889..6a60e62a313c 100644
> --- a/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml
> +++ b/Documentation/devicetree/bindings/regulator/ti,tps65219.yaml
> @@ -25,6 +25,17 @@ properties:
> description: Optional property that indicates that this device is
> controlling system power.
>
> + interrupts:
> + description: Short-circuit, over-current, under-voltage for regulators, PB interrupts.
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + '#interrupt-cells':
> + description: Specifies the PIN numbers and Flags, as defined in
> + include/dt-bindings/interrupt-controller/irq.h
> + const: 1
> +
> patternProperties:
> "^buck[1-3]-supply$":
> description: Input supply phandle of one regulator.
> @@ -71,12 +82,16 @@ patternProperties:
> required:
> - compatible
> - reg
> + - interrupts
> + - interrupt-controller
> + - '#interrupt-cells'
> - regulators
>
> additionalProperties: false
>
> examples:
> - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> i2c {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -92,6 +107,13 @@ examples:
> ldo3-supply = <&vcc_3v3_sys>;
> ldo4-supply = <&vcc_3v3_sys>;
>
> + pinctrl-0 = <&pmic_irq_pins_default>;
> +
> + interrupt-parent = <&gic500>;
> + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> regulators {
> buck1_reg: buck1 {
> regulator-name = "VDD_CORE";
> --
> 2.17.1
>
>
