On Mon, Jul 18, 2022 at 03:18:28PM +0100, Lee Jones wrote: > On Tue, 05 Jul 2022, Colin Foster wrote: > > > The VSC7512 is a networking chip that contains several peripherals. Many of > > these peripherals are currently supported by the VSC7513 and VSC7514 chips, > > but those run on an internal CPU. The VSC7512 lacks this CPU, and must be > > controlled externally. > > > > Utilize the existing drivers by referencing the chip as an MFD. Add support > > for the two MDIO buses, the internal phys, pinctrl, and serial GPIO. > > > > Signed-off-by: Colin Foster <colin.foster@xxxxxxxxxxxxxxxx> > > --- > > MAINTAINERS | 1 + > > drivers/mfd/Kconfig | 21 +++ > > drivers/mfd/Makefile | 3 + > > drivers/mfd/ocelot-core.c | 169 ++++++++++++++++++++ > > drivers/mfd/ocelot-spi.c | 317 ++++++++++++++++++++++++++++++++++++++ > > drivers/mfd/ocelot.h | 34 ++++ > > 6 files changed, 545 insertions(+) > > create mode 100644 drivers/mfd/ocelot-core.c > > create mode 100644 drivers/mfd/ocelot-spi.c > > create mode 100644 drivers/mfd/ocelot.h > > Generally this is looking much better. > > Almost ready for inclusion with just a few nits. > Hi Lee, Thanks for the feedback. I'll get these fixes done this week!
