Re: [PATCH v2 03/12] reset: add polarfire soc reset support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/07/2022 13:15, Conor Dooley wrote:
> Add support for the resets on Microchip's PolarFire SoC (MPFS).
> Reset control is a single register, wedged in between registers for
> clock control. To fit with existed DT etc, the reset controller is
> created using the aux device framework & set up in the clock driver.

Hey Philipp,
I resolved your comments on V1. Do you have any remaining concerns?
Thanks,
Conor.

> 
> Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> ---
>   drivers/reset/Kconfig      |   7 ++
>   drivers/reset/Makefile     |   2 +-
>   drivers/reset/reset-mpfs.c | 157 +++++++++++++++++++++++++++++++++++++
>   3 files changed, 165 insertions(+), 1 deletion(-)
>   create mode 100644 drivers/reset/reset-mpfs.c
> 
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 93c8d07ee328..edfdc7b2bc5f 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -122,6 +122,13 @@ config RESET_MCHP_SPARX5
>   	help
>   	  This driver supports switch core reset for the Microchip Sparx5 SoC.
>   
> +config RESET_POLARFIRE_SOC
> +	bool "Microchip PolarFire SoC (MPFS) Reset Driver"
> +	depends on AUXILIARY_BUS && MCHP_CLK_MPFS
> +	default MCHP_CLK_MPFS
> +	help
> +	  This driver supports peripheral reset for the Microchip PolarFire SoC
> +
>   config RESET_MESON
>   	tristate "Meson Reset Driver"
>   	depends on ARCH_MESON || COMPILE_TEST
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index a80a9c4008a7..5fac3a753858 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_RESET_K210) += reset-k210.o
>   obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o
>   obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
>   obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o
> +obj-$(CONFIG_RESET_POLARFIRE_SOC) += reset-mpfs.o
>   obj-$(CONFIG_RESET_MESON) += reset-meson.o
>   obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o
>   obj-$(CONFIG_RESET_NPCM) += reset-npcm.o
> @@ -38,4 +39,3 @@ obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
>   obj-$(CONFIG_RESET_UNIPHIER_GLUE) += reset-uniphier-glue.o
>   obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
>   obj-$(CONFIG_ARCH_ZYNQMP) += reset-zynqmp.o
> -
> diff --git a/drivers/reset/reset-mpfs.c b/drivers/reset/reset-mpfs.c
> new file mode 100644
> index 000000000000..1580d1b68d61
> --- /dev/null
> +++ b/drivers/reset/reset-mpfs.c
> @@ -0,0 +1,157 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * PolarFire SoC (MPFS) Peripheral Clock Reset Controller
> + *
> + * Author: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> + * Copyright (c) 2022 Microchip Technology Inc. and its subsidiaries.
> + *
> + */
> +#include <linux/auxiliary_bus.h>
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset-controller.h>
> +#include <dt-bindings/clock/microchip,mpfs-clock.h>
> +#include <soc/microchip/mpfs.h>
> +
> +/*
> + * The ENVM reset is the lowest bit in the register & I am using the CLK_FOO
> + * defines in the dt to make things easier to configure - so this is accounting
> + * for the offset of 3 there.
> + */
> +#define MPFS_PERIPH_OFFSET	CLK_ENVM
> +#define MPFS_NUM_RESETS		30u
> +#define MPFS_SLEEP_MIN_US	100
> +#define MPFS_SLEEP_MAX_US	200
> +
> +/* block concurrent access to the soft reset register */
> +static DEFINE_SPINLOCK(mpfs_reset_lock);
> +
> +/*
> + * Peripheral clock resets
> + */
> +
> +static int mpfs_assert(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	unsigned long flags;
> +	u32 reg;
> +
> +	spin_lock_irqsave(&mpfs_reset_lock, flags);
> +
> +	reg = mpfs_reset_read(rcdev->dev);
> +	reg |= BIT(id);
> +	mpfs_reset_write(rcdev->dev, reg);
> +
> +	spin_unlock_irqrestore(&mpfs_reset_lock, flags);
> +
> +	return 0;
> +}
> +
> +static int mpfs_deassert(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	unsigned long flags;
> +	u32 reg, val;
> +
> +	spin_lock_irqsave(&mpfs_reset_lock, flags);
> +
> +	reg = mpfs_reset_read(rcdev->dev);
> +	val = reg & ~BIT(id);
> +	mpfs_reset_write(rcdev->dev, val);
> +
> +	spin_unlock_irqrestore(&mpfs_reset_lock, flags);
> +
> +	return 0;
> +}
> +
> +static int mpfs_status(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	u32 reg = mpfs_reset_read(rcdev->dev);
> +
> +	/*
> +	 * It is safe to return here as MPFS_NUM_RESETS makes sure the sign bit
> +	 * is never hit.
> +	 */
> +	return (reg & BIT(id));
> +}
> +
> +static int mpfs_reset(struct reset_controller_dev *rcdev, unsigned long id)
> +{
> +	mpfs_assert(rcdev, id);
> +
> +	usleep_range(MPFS_SLEEP_MIN_US, MPFS_SLEEP_MAX_US);
> +
> +	mpfs_deassert(rcdev, id);
> +
> +	return 0;
> +}
> +
> +static const struct reset_control_ops mpfs_reset_ops = {
> +	.reset = mpfs_reset,
> +	.assert = mpfs_assert,
> +	.deassert = mpfs_deassert,
> +	.status = mpfs_status,
> +};
> +
> +static int mpfs_reset_xlate(struct reset_controller_dev *rcdev,
> +			    const struct of_phandle_args *reset_spec)
> +{
> +	unsigned int index = reset_spec->args[0];
> +
> +	/*
> +	 * CLK_RESERVED does not map to a clock, but it does map to a reset,
> +	 * so it has to be accounted for here. It is the reset for the fabric,
> +	 * so if this reset gets called - do not reset it.
> +	 */
> +	if (index == CLK_RESERVED) {
> +		dev_err(rcdev->dev, "Resetting the fabric is not supported\n");
> +		return -EINVAL;
> +	}
> +
> +	if (index < MPFS_PERIPH_OFFSET || index >= (MPFS_PERIPH_OFFSET + rcdev->nr_resets)) {
> +		dev_err(rcdev->dev, "Invalid reset index %u\n", index);
> +		return -EINVAL;
> +	}
> +
> +	return index - MPFS_PERIPH_OFFSET;
> +}
> +
> +static int mpfs_reset_probe(struct auxiliary_device *adev,
> +			    const struct auxiliary_device_id *id)
> +{
> +	struct device *dev = &adev->dev;
> +	struct reset_controller_dev *rcdev;
> +
> +	rcdev = devm_kzalloc(dev, sizeof(*rcdev), GFP_KERNEL);
> +	if (!rcdev)
> +		return -ENOMEM;
> +
> +	rcdev->dev = dev;
> +	rcdev->dev->parent = dev->parent;
> +	rcdev->ops = &mpfs_reset_ops;
> +	rcdev->of_node = dev->parent->of_node;
> +	rcdev->of_reset_n_cells = 1;
> +	rcdev->of_xlate = mpfs_reset_xlate;
> +	rcdev->nr_resets = MPFS_NUM_RESETS;
> +
> +	return devm_reset_controller_register(dev, rcdev);
> +}
> +
> +static const struct auxiliary_device_id mpfs_reset_ids[] = {
> +	{
> +		.name = "clk_mpfs.reset-mpfs",
> +	},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(auxiliary, mpfs_reset_ids);
> +
> +static struct auxiliary_driver mpfs_reset_driver = {
> +	.probe		= mpfs_reset_probe,
> +	.id_table	= mpfs_reset_ids,
> +};
> +
> +module_auxiliary_driver(mpfs_reset_driver);
> +
> +MODULE_DESCRIPTION("Microchip PolarFire SoC Reset Driver");
> +MODULE_AUTHOR("Conor Dooley <conor.dooley@xxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS(MCHP_CLK_MPFS);





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux