Hi Alexander,
Thanks for the set.
On Fri, Jul 15, 2022 at 09:48:57AM +0200, Alexander Stein wrote:
> Need in case the sensors is supplied by a switchable regulator.
>
> Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> ---
> Changes in v2:
> * Remove error message for failed regulator_bulk_disable()
> * Rename ov9282_configure_regulators to ov9282_get_regulators
>
> drivers/media/i2c/ov9282.c | 39 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 39 insertions(+)
>
> diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
> index 04fda8222e07..263cdffc558f 100644
> --- a/drivers/media/i2c/ov9282.c
> +++ b/drivers/media/i2c/ov9282.c
> @@ -11,6 +11,7 @@
> #include <linux/i2c.h>
> #include <linux/module.h>
> #include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-fwnode.h>
> @@ -55,6 +56,14 @@
> #define OV9282_REG_MIN 0x00
> #define OV9282_REG_MAX 0xfffff
>
> +static const char * const ov9282_supply_names[] = {
> + "avdd", /* Analog power */
> + "dovdd", /* Digital I/O power */
> + "dvdd", /* Digital core power */
> +};
> +
> +#define OV9282_NUM_SUPPLIES ARRAY_SIZE(ov9282_supply_names)
> +
> /**
> * struct ov9282_reg - ov9282 sensor register
> * @address: Register address
> @@ -127,6 +136,7 @@ struct ov9282 {
> struct media_pad pad;
> struct gpio_desc *reset_gpio;
> struct clk *inclk;
> + struct regulator_bulk_data supplies[OV9282_NUM_SUPPLIES];
> struct v4l2_ctrl_handler ctrl_handler;
> struct v4l2_ctrl *link_freq_ctrl;
> struct v4l2_ctrl *pclk_ctrl;
> @@ -883,10 +893,18 @@ static int ov9282_power_on(struct device *dev)
> goto error_reset;
> }
>
> + ret = regulator_bulk_enable(ARRAY_SIZE(ov9282->supplies), ov9282->supplies);
Please run the set through:
./scripts/checkpatch.pl --strict --max-line-length=80
> + if (ret) {
> + dev_err(dev, "Failed to enable regulators\n");
> + goto disable_clk;
> + }
> +
> usleep_range(400, 600);
>
> return 0;
>
> +disable_clk:
> + clk_disable_unprepare(ov9282->inclk);
> error_reset:
> gpiod_set_value_cansleep(ov9282->reset_gpio, 0);
>
> @@ -903,6 +921,9 @@ static int ov9282_power_off(struct device *dev)
> {
> struct v4l2_subdev *sd = dev_get_drvdata(dev);
> struct ov9282 *ov9282 = to_ov9282(sd);
> + int ret;
ret seems to be unused.
> +
> + regulator_bulk_disable(ARRAY_SIZE(ov9282->supplies), ov9282->supplies);
>
> gpiod_set_value_cansleep(ov9282->reset_gpio, 0);
>
> @@ -996,6 +1017,18 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
> return 0;
> }
>
> +static int ov9282_get_regulators(struct ov9282 *ov9282)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(ov9282->supplies); i++)
> + ov9282->supplies[i].supply = ov9282_supply_names[i];
> +
> + return devm_regulator_bulk_get(ov9282->dev,
> + ARRAY_SIZE(ov9282->supplies),
> + ov9282->supplies);
> +}
> +
> /**
> * ov9282_probe() - I2C client device binding
> * @client: pointer to i2c client device
> @@ -1022,6 +1055,12 @@ static int ov9282_probe(struct i2c_client *client)
> return ret;
> }
>
> + ret = ov9282_get_regulators(ov9282);
> + if (ret) {
> + dev_err(&client->dev, "Failed to get power regulators\n");
> + return ret;
> + }
> +
> mutex_init(&ov9282->mutex);
>
> ret = ov9282_power_on(ov9282->dev);
--
Kind regards,
Sakari Ailus
