Updated the NPCM reset driver to add support for Nuvoton BMC NPCM8XX SoC.
As part of adding NPCM8XX support:
- Add NPCM8XX specific compatible string.
- Add NPCM8XX USB reset.
- Add data to handle architecture-specific reset parameters.
- Some of the Reset Id and number of resets are different from NPCM7XX.
Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
Acked-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
---
drivers/reset/reset-npcm.c | 211 ++++++++++++++++++++++++++++++-------
1 file changed, 173 insertions(+), 38 deletions(-)
diff --git a/drivers/reset/reset-npcm.c b/drivers/reset/reset-npcm.c
index b08f8d8a1d63..24c55efa98e5 100644
--- a/drivers/reset/reset-npcm.c
+++ b/drivers/reset/reset-npcm.c
@@ -17,13 +17,20 @@
/* NPCM7xx GCR registers */
#define NPCM_MDLR_OFFSET 0x7C
-#define NPCM_MDLR_USBD0 BIT(9)
-#define NPCM_MDLR_USBD1 BIT(8)
-#define NPCM_MDLR_USBD2_4 BIT(21)
-#define NPCM_MDLR_USBD5_9 BIT(22)
+#define NPCM7XX_MDLR_USBD0 BIT(9)
+#define NPCM7XX_MDLR_USBD1 BIT(8)
+#define NPCM7XX_MDLR_USBD2_4 BIT(21)
+#define NPCM7XX_MDLR_USBD5_9 BIT(22)
+
+/* NPCM8xx MDLR bits */
+#define NPCM8XX_MDLR_USBD0_3 BIT(9)
+#define NPCM8XX_MDLR_USBD4_7 BIT(22)
+#define NPCM8XX_MDLR_USBD8 BIT(24)
+#define NPCM8XX_MDLR_USBD9 BIT(21)
#define NPCM_USB1PHYCTL_OFFSET 0x140
#define NPCM_USB2PHYCTL_OFFSET 0x144
+#define NPCM_USB3PHYCTL_OFFSET 0x148
#define NPCM_USBXPHYCTL_RS BIT(28)
/* NPCM7xx Reset registers */
@@ -49,12 +56,38 @@
#define NPCM_IPSRST3_USBPHY1 BIT(24)
#define NPCM_IPSRST3_USBPHY2 BIT(25)
+#define NPCM_IPSRST4 0x74
+#define NPCM_IPSRST4_USBPHY3 BIT(25)
+#define NPCM_IPSRST4_USB_HOST2 BIT(31)
+
#define NPCM_RC_RESETS_PER_REG 32
#define NPCM_MASK_RESETS GENMASK(4, 0)
+enum {
+ BMC_NPCM7XX = 0,
+ BMC_NPCM8XX,
+};
+
+static const u32 npxm7xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3};
+static const u32 npxm8xx_ipsrst[] = {NPCM_IPSRST1, NPCM_IPSRST2, NPCM_IPSRST3,
+ NPCM_IPSRST4};
+
+struct npcm_reset_info {
+ u32 bmc_id;
+ u32 num_ipsrst;
+ const u32 *ipsrst;
+};
+
+static const struct npcm_reset_info npxm7xx_reset_info[] = {
+ {.bmc_id = BMC_NPCM7XX, .num_ipsrst = 3, .ipsrst = npxm7xx_ipsrst}};
+static const struct npcm_reset_info npxm8xx_reset_info[] = {
+ {.bmc_id = BMC_NPCM8XX, .num_ipsrst = 4, .ipsrst = npxm8xx_ipsrst}};
+
struct npcm_rc_data {
struct reset_controller_dev rcdev;
struct notifier_block restart_nb;
+ const struct npcm_reset_info *info;
+ struct regmap *gcr_regmap;
u32 sw_reset_number;
void __iomem *base;
spinlock_t lock;
@@ -120,14 +153,24 @@ static int npcm_rc_status(struct reset_controller_dev *rcdev,
static int npcm_reset_xlate(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec)
{
+ struct npcm_rc_data *rc = to_rc_data(rcdev);
unsigned int offset, bit;
+ bool offset_found = false;
+ int off_num;
offset = reset_spec->args[0];
- if (offset != NPCM_IPSRST1 && offset != NPCM_IPSRST2 &&
- offset != NPCM_IPSRST3) {
+ for (off_num = 0 ; off_num < rc->info->num_ipsrst ; off_num++) {
+ if (offset == rc->info->ipsrst[off_num]) {
+ offset_found = true;
+ break;
+ }
+ }
+
+ if (!offset_found) {
dev_err(rcdev->dev, "Error reset register (0x%x)\n", offset);
return -EINVAL;
}
+
bit = reset_spec->args[1];
if (bit >= NPCM_RC_RESETS_PER_REG) {
dev_err(rcdev->dev, "Error reset number (%d)\n", bit);
@@ -138,49 +181,29 @@ static int npcm_reset_xlate(struct reset_controller_dev *rcdev,
}
static const struct of_device_id npcm_rc_match[] = {
- { .compatible = "nuvoton,npcm750-reset" },
+ { .compatible = "nuvoton,npcm750-reset", .data = &npxm7xx_reset_info},
+ { .compatible = "nuvoton,npcm845-reset", .data = &npxm8xx_reset_info},
{ }
};
-/*
- * The following procedure should be observed in USB PHY, USB device and
- * USB host initialization at BMC boot
- */
-static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
+static void npcm_usb_reset_npcm7xx(struct npcm_rc_data *rc)
{
u32 mdlr, iprst1, iprst2, iprst3;
- struct device *dev = &pdev->dev;
- struct regmap *gcr_regmap;
u32 ipsrst1_bits = 0;
u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST;
u32 ipsrst3_bits = 0;
- const char *gcr_dt;
-
- gcr_dt = (const char *)
- of_match_device(dev->driver->of_match_table, dev)->data;
-
- gcr_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "nuvoton,sysgcr");
- if (IS_ERR(gcr_regmap)) {
- dev_warn(&pdev->dev, "Failed to find nuvoton,sysgcr property, please update the device tree\n");
- dev_info(&pdev->dev, "Using nuvoton,npcm750-gcr for Poleg backward compatibility\n");
- gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr");
- if (IS_ERR(gcr_regmap)) {
- dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-gcr");
- return PTR_ERR(gcr_regmap);
- }
- }
/* checking which USB device is enabled */
- regmap_read(gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
- if (!(mdlr & NPCM_MDLR_USBD0))
+ regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
+ if (!(mdlr & NPCM7XX_MDLR_USBD0))
ipsrst3_bits |= NPCM_IPSRST3_USBD0;
- if (!(mdlr & NPCM_MDLR_USBD1))
+ if (!(mdlr & NPCM7XX_MDLR_USBD1))
ipsrst1_bits |= NPCM_IPSRST1_USBD1;
- if (!(mdlr & NPCM_MDLR_USBD2_4))
+ if (!(mdlr & NPCM7XX_MDLR_USBD2_4))
ipsrst1_bits |= (NPCM_IPSRST1_USBD2 |
NPCM_IPSRST1_USBD3 |
NPCM_IPSRST1_USBD4);
- if (!(mdlr & NPCM_MDLR_USBD0)) {
+ if (!(mdlr & NPCM7XX_MDLR_USBD0)) {
ipsrst1_bits |= (NPCM_IPSRST1_USBD5 |
NPCM_IPSRST1_USBD6);
ipsrst3_bits |= (NPCM_IPSRST3_USBD7 |
@@ -203,9 +226,9 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
writel(iprst3, rc->base + NPCM_IPSRST3);
/* clear USB PHY RS bit */
- regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
NPCM_USBXPHYCTL_RS, 0);
- regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
NPCM_USBXPHYCTL_RS, 0);
/* deassert reset USB PHY */
@@ -215,9 +238,9 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
udelay(50);
/* set USB PHY RS bit */
- regmap_update_bits(gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
- regmap_update_bits(gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
/* deassert reset USB devices*/
@@ -228,6 +251,118 @@ static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
writel(iprst1, rc->base + NPCM_IPSRST1);
writel(iprst2, rc->base + NPCM_IPSRST2);
writel(iprst3, rc->base + NPCM_IPSRST3);
+}
+
+static void npcm_usb_reset_npcm8xx(struct npcm_rc_data *rc)
+{
+ u32 mdlr, iprst1, iprst2, iprst3, iprst4;
+ u32 ipsrst1_bits = 0;
+ u32 ipsrst2_bits = NPCM_IPSRST2_USB_HOST;
+ u32 ipsrst3_bits = 0;
+ u32 ipsrst4_bits = NPCM_IPSRST4_USB_HOST2 | NPCM_IPSRST4_USBPHY3;
+
+ /* checking which USB device is enabled */
+ regmap_read(rc->gcr_regmap, NPCM_MDLR_OFFSET, &mdlr);
+ if (!(mdlr & NPCM8XX_MDLR_USBD0_3)) {
+ ipsrst3_bits |= NPCM_IPSRST3_USBD0;
+ ipsrst1_bits |= (NPCM_IPSRST1_USBD1 |
+ NPCM_IPSRST1_USBD2 |
+ NPCM_IPSRST1_USBD3);
+ }
+ if (!(mdlr & NPCM8XX_MDLR_USBD4_7)) {
+ ipsrst1_bits |= (NPCM_IPSRST1_USBD4 |
+ NPCM_IPSRST1_USBD5 |
+ NPCM_IPSRST1_USBD6);
+ ipsrst3_bits |= NPCM_IPSRST3_USBD7;
+ }
+
+ if (!(mdlr & NPCM8XX_MDLR_USBD8))
+ ipsrst3_bits |= NPCM_IPSRST3_USBD8;
+ if (!(mdlr & NPCM8XX_MDLR_USBD9))
+ ipsrst3_bits |= NPCM_IPSRST3_USBD9;
+
+ /* assert reset USB PHY and USB devices */
+ iprst1 = readl(rc->base + NPCM_IPSRST1);
+ iprst2 = readl(rc->base + NPCM_IPSRST2);
+ iprst3 = readl(rc->base + NPCM_IPSRST3);
+ iprst4 = readl(rc->base + NPCM_IPSRST4);
+
+ iprst1 |= ipsrst1_bits;
+ iprst2 |= ipsrst2_bits;
+ iprst3 |= (ipsrst3_bits | NPCM_IPSRST3_USBPHY1 |
+ NPCM_IPSRST3_USBPHY2);
+ iprst2 |= ipsrst4_bits;
+
+ writel(iprst1, rc->base + NPCM_IPSRST1);
+ writel(iprst2, rc->base + NPCM_IPSRST2);
+ writel(iprst3, rc->base + NPCM_IPSRST3);
+ writel(iprst4, rc->base + NPCM_IPSRST4);
+
+ /* clear USB PHY RS bit */
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, 0);
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, 0);
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, 0);
+
+ /* deassert reset USB PHY */
+ iprst3 &= ~(NPCM_IPSRST3_USBPHY1 | NPCM_IPSRST3_USBPHY2);
+ writel(iprst3, rc->base + NPCM_IPSRST3);
+ iprst4 &= ~NPCM_IPSRST4_USBPHY3;
+ writel(iprst4, rc->base + NPCM_IPSRST4);
+
+ /* set USB PHY RS bit */
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB1PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB2PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+ regmap_update_bits(rc->gcr_regmap, NPCM_USB3PHYCTL_OFFSET,
+ NPCM_USBXPHYCTL_RS, NPCM_USBXPHYCTL_RS);
+
+ /* deassert reset USB devices*/
+ iprst1 &= ~ipsrst1_bits;
+ iprst2 &= ~ipsrst2_bits;
+ iprst3 &= ~ipsrst3_bits;
+ iprst4 &= ~ipsrst4_bits;
+
+ writel(iprst1, rc->base + NPCM_IPSRST1);
+ writel(iprst2, rc->base + NPCM_IPSRST2);
+ writel(iprst3, rc->base + NPCM_IPSRST3);
+ writel(iprst4, rc->base + NPCM_IPSRST4);
+}
+
+/*
+ * The following procedure should be observed in USB PHY, USB device and
+ * USB host initialization at BMC boot
+ */
+static int npcm_usb_reset(struct platform_device *pdev, struct npcm_rc_data *rc)
+{
+ struct device *dev = &pdev->dev;
+
+ rc->gcr_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "nuvoton,sysgcr");
+ if (IS_ERR(rc->gcr_regmap)) {
+ dev_warn(&pdev->dev, "Failed to find nuvoton,sysgcr property, please update the device tree\n");
+ dev_info(&pdev->dev, "Using nuvoton,npcm750-gcr for Poleg backward compatibility\n");
+ rc->gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr");
+ if (IS_ERR(rc->gcr_regmap)) {
+ dev_err(&pdev->dev, "Failed to find nuvoton,npcm750-gcr");
+ return PTR_ERR(rc->gcr_regmap);
+ }
+ }
+
+ rc->info = (const struct npcm_reset_info *)
+ of_match_device(dev->driver->of_match_table, dev)->data;
+ switch (rc->info->bmc_id) {
+ case BMC_NPCM7XX:
+ npcm_usb_reset_npcm7xx(rc);
+ break;
+ case BMC_NPCM8XX:
+ npcm_usb_reset_npcm8xx(rc);
+ break;
+ default:
+ return -ENODEV;
+ }
return 0;
}
--
2.33.0
