On Wed 06 Jul 20:09 CDT 2022, Christian Marangi wrote: > This is a respin of "Multiple addition to ipq8064 dtsi" series > with major changes and some commit removed. > > This series try to add some of the missing bindings for ipq806x. > > This still lacks of the cpu bindings and all the bindings required > to scale cpu clk or L2. These will come later as the driver and > documentation require some changes. > > So for now we try to add bindings that can directly applied without > making changes to any drivers. > > Changes: > v2: > - Dropped "add sic non secure node for ipq8064" (no user found) > - Dropped "add smem node for ipq8064" (require changes to the driver > to remove syscon node and use regs directly, will be added in a > different series) > - Dropped "fix dtc warning for missing #address-cells for ipq8064" ( > doesn't actually fix any warning) > - Changed "enable usb phy by default for ipq8064" to disable usb phy > by default > - Reworked rpm smb208 declaration to a saparate dtsi > - Fixed order with compatible-reg-status > - Squashed "remove redundant binding from ipq8064 rb3011 dts" with > "add multiple missing pin definition for ipq8064" to prevent dtc > error. > - Add review tag for snps patch > > Changes from "Multiple addition to ipq8064 dtsi": > v3: > - Fix error in rb3011 dts > - Add tested-by tag on the entire series > v2: > - Added missing patch > - Added additional gsbi6 spi > - Added extra description for L2 cache opp > - Fxied smb208 enabled by default that is problematic for rb3011 devices > > Christian Marangi (8): > ARM: dts: qcom: add multiple missing pin definition for ipq8064 > ARM: dts: qcom: add gsbi6 missing definition for ipq8064 > ARM: dts: qcom: add specific ipq8064 dtsi with smb208 rpm regulators > ARM: dts: qcom: add missing snps,dwmac compatible for gmac ipq8064 > ARM: dts: qcom: disable usb phy by default for ipq8064 > ARM: dts: qcom: reduce pci IO size to 64K for ipq8064 > ARM: dts: qcom: fix and add some missing gsbi node for ipq8064 > ARM: dts: qcom: add speedbin efuse nvmem node Please prefix your ipa8064-specific patches with "ARM: dts: qcom: ipq8064: ..." It makes the git history easier to read, so I fixed it up while applying these. Thanks, Bjorn > > arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 6 - > arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 9 -- > arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi | 37 +++++ > arch/arm/boot/dts/qcom-ipq8064.dtsi | 150 +++++++++++++++++++-- > 4 files changed, 179 insertions(+), 23 deletions(-) > create mode 100644 arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi > > -- > 2.36.1 >