On Sat, 16 Jul 2022 17:25:31 +0100
Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> On Tue, 28 Jun 2022 18:16:14 +0300
> Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> wrote:
>
> > Check return status of at91_adc_read_position() and
> > at91_adc_read_pressure() in at91_adc_read_info_raw().
> >
> > Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution")
> > Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> > ---
> > drivers/iio/adc/at91-sama5d2_adc.c | 8 ++++++--
> > 1 file changed, 6 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
> > index 32b6f157b803..c3301c749164 100644
> > --- a/drivers/iio/adc/at91-sama5d2_adc.c
> > +++ b/drivers/iio/adc/at91-sama5d2_adc.c
> > @@ -1544,8 +1544,10 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
> > *val = tmp_val;
> > mutex_unlock(&st->lock);
> > iio_device_release_direct_mode(indio_dev);
> Prefer to keep error path out of line.
>
> if (ret < 0)
> return ret;
>
> return at91_adc_adjust_val_osr();
>
> Also ends up as a slightly less invasive change.
Ah. I should have read on through the series. Ignore this.
>
> > + if (ret > 0)
> > + ret = at91_adc_adjust_val_osr(st, val);
> >
> > - return at91_adc_adjust_val_osr(st, val);
> > + return ret;
> > }
> > if (chan->type == IIO_PRESSURE) {
> > ret = iio_device_claim_direct_mode(indio_dev);
> > @@ -1558,8 +1560,10 @@ static int at91_adc_read_info_raw(struct iio_dev *indio_dev,
> > *val = tmp_val;
> > mutex_unlock(&st->lock);
> > iio_device_release_direct_mode(indio_dev);
> > + if (ret > 0)
> > + ret = at91_adc_adjust_val_osr(st, val);
> >
> > - return at91_adc_adjust_val_osr(st, val);
> As above.
>
> > + return ret;
> > }
> >
> > /* in this case we have a voltage channel */
>
