imx mu support generate irq by write a register. provide msi controller support so other driver can use it by standard msi interface. Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- .../interrupt-controller/fsl,mu-msi.yaml | 88 +++++++++++++++++++ 1 file changed, 88 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml new file mode 100644 index 0000000000000..732ce770ac3bd --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/fsl,mu-msi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX Messaging Unit (MU) work as msi controller + +maintainers: + - Frank Li <Frank.Li@xxxxxxx> + +description: | + The Messaging Unit module enables two processors within the SoC to + communicate and coordinate by passing messages (e.g. data, status + and control) through the MU interface. The MU also provides the ability + for one processor to signal the other processor using interrupts. + + Because the MU manages the messaging between processors, the MU uses + different clocks (from each side of the different peripheral buses). + Therefore, the MU must synchronize the accesses from one side to the + other. The MU accomplishes synchronization using two sets of matching + registers (Processor A-facing, Processor B-facing). + + MU can work as msi interrupt controller to do doorbell + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + enum: + - fsl,imx6sx-mu-msi + - fsl,imx7ulp-mu-msi + - fsl,imx8ulp-mu-msi + - fsl,imx8ulp-mu-msi-s4 + + reg: + minItems: 2 + + reg-names: + items: + - const: a + - const: b + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 2 + + power-domain-names: + items: + - const: a + - const: b + + interrupt-controller: true + + msi-controller: true + +required: + - compatible + - reg + - interrupts + - msi-controller + - interrupt-controller + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/firmware/imx/rsrc.h> + + lsio_mu12: interrupt-controller@5d270000 { + compatible = "fsl,imx6sx-mu-msi"; + msi-controller; + interrupt-controller; + reg = <0x5d270000 0x10000>, /* A side */ + <0x5d300000 0x10000>; /* B side */ + reg-names = "a", "b"; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_MU_12A>, + <&pd IMX_SC_R_MU_12B>; + power-domain-names = "a", "b"; + }; -- 2.35.1
