pwm support incompatible with Armada 80x0/70x0 API is not only in
Armada 370, but also in Armada XP, 38x and 39x. So basically every non-A8K
platform. Fix check for pwm support appropriately.
Fixes: 85b7d8abfec7 ("gpio: mvebu: add pwm support for Armada 8K/7K")
Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
---
Changes in v2:
* reverse the if/else order per Baruch request
---
drivers/gpio/gpio-mvebu.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 2db19cd640a4..de1e7a1a76f2 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -793,8 +793,12 @@ static int mvebu_pwm_probe(struct platform_device *pdev,
u32 offset;
u32 set;
- if (of_device_is_compatible(mvchip->chip.of_node,
- "marvell,armada-370-gpio")) {
+ if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K) {
+ int ret = of_property_read_u32(dev->of_node,
+ "marvell,pwm-offset", &offset);
+ if (ret < 0)
+ return 0;
+ } else {
/*
* There are only two sets of PWM configuration registers for
* all the GPIO lines on those SoCs which this driver reserves
@@ -804,13 +808,6 @@ static int mvebu_pwm_probe(struct platform_device *pdev,
if (!platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"))
return 0;
offset = 0;
- } else if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K) {
- int ret = of_property_read_u32(dev->of_node,
- "marvell,pwm-offset", &offset);
- if (ret < 0)
- return 0;
- } else {
- return 0;
}
if (IS_ERR(mvchip->clk))
--
2.20.1
