Re: [PATCH 3/4] arm64: dts: qcom: sm8450: Add SDHCI2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/07/2022 22:10, Konrad Dybcio wrote:
> Add and configure the SDHCI host responsible for (mostly) SD Card and
> its corresponding pins' sleep states.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8450.dtsi | 59 ++++++++++++++++++++++++++++
>  1 file changed, 59 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> index 09e7587de0de..daea2fe7f83d 100644
> --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
> @@ -2355,6 +2355,26 @@ tlmm: pinctrl@f100000 {
>  			gpio-ranges = <&tlmm 0 0 211>;
>  			wakeup-parent = <&pdc>;
>  
> +			sdc2_sleep_state: sdc2-sleep {
> +				clk {
> +					pins = "sdc2_clk";
> +					drive-strength = <2>;
> +					bias-disable;
> +				};
> +
> +				cmd {
> +					pins = "sdc2_cmd";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +
> +				data {
> +					pins = "sdc2_data";
> +					drive-strength = <2>;
> +					bias-pull-up;
> +				};
> +			};
> +
>  			pcie0_default_state: pcie0-default-state {
>  				perst {
>  					pins = "gpio94";
> @@ -3101,6 +3121,45 @@ ufs_mem_phy_lanes: phy@1d87400 {
>  			};
>  		};
>  
> +		sdhc_2: sdhci@8804000 {
> +			compatible = "qcom,sm8450-sdhci", "qcom,sdhci-msm-v5";
> +			reg = <0 0x08804000 0 0x1000>;
> +
> +			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "hc_irq", "pwr_irq";
> +
> +			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
> +				 <&gcc GCC_SDCC2_APPS_CLK>,
> +				 <&rpmhcc RPMH_CXO_CLK>;
> +			clock-names = "iface", "core", "xo";
> +			resets = <&gcc GCC_SDCC2_BCR>;
> +			interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
> +					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
> +			interconnect-names = "sdhc-ddr","cpu-sdhc";
> +			iommus = <&apps_smmu 0x4a0 0x0>;
> +			power-domains = <&rpmhpd SM8450_CX>;
> +			operating-points-v2 = <&sdhc2_opp_table>;
> +			bus-width = <4>;
> +			dma-coherent;
> +
> +			status = "disabled";
> +
> +			sdhc2_opp_table: sdhc2-opp-table {

This does not match the bindings. Just "opp-table".


Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux