On Wednesday 01 October 2014 14:59:01 Mika Westerberg wrote: > On Wed, Oct 01, 2014 at 12:01:34PM +0200, Arnd Bergmann wrote: > > On Wednesday 01 October 2014 12:13:09 Mika Westerberg wrote: > > > > > > > Regarding the MODULE_DEVICE_TABLE, I suspect the above won't work the > > > > way you are hoping for, because once you get to dozens or hundreds of > > > > drivers doing this, each device will show up with the same string, > > > > so udev will try to load all the modules that list "PRP0001". That > > > > doesn't look right. With the code from patch 3, you can probably drop > > > > the acpi MODULE_DEVICE_TABLE() entirely and get the correct behavior. > > > > > > It actually works like this now: > > > > > > # cd /sys/bus/platform/devices/PRP0001\:00/ > > > DRIVER=leds-gpio > > > MODALIAS=of:Nprp0001TacpiCgpio-leds > > > > > > # cat modalias > > > of:Nprp0001TacpiCgpio-leds > > > > > > In other words the modalias changes to be of:Nprp0001Tacpi, e.g > > > name=prp0001, type=acpi and then list of compatible values. > > > > > > Udev then loads only module that matches the modalias so it should not > > > load everything listing PRP0001 in their MODULE_DEVICE_TABLE(). > > > > I'm not completely following yet. I can see how this works now, but > > how is this better than just using the existing modalias for OF? > > You mean using just what of_device_get_modalias() would create? In that > case, what do we put to name and type fields? Sorry, I think we're still both misunderstanding one another. You were talking about the modalias created by the device scanning above, while I meant the one in the MODULE_DEVICE_TABLE. With the entry you create in create_modalias(), you will only ever match against the MODULE_DEVICE_TABLE(of, of_gpio_leds_match) line, not against the MODULE_DEVICE_TABLE(acpi, acpi_gpio_leds_match), so I think you can just drop the latter. On the question what to put into the name and type fields, that is unrelated. The type is supposed to be for the 'device_type' property in DT, which we should never rely on in a driver that supports both APCI and DT. In Linux we only use that for "pci", "cpu" and "memory", all of which have their own way of getting probed in ACPI. The "name" is normally ignored in DT as well, except for backwards compatibility with old bindings, but I would argue that you should not just put "prp0001" in there. Either leave it empty like type, or use the name of the device as it appears in the ACPI tables, such as "DEV0" or "PWM". Arnd -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
