On Mon, Sep 29, 2014 at 01:04:49PM +0100, zhang.lyra@xxxxxxxxx wrote:
> From: "zhizhou.zhang" <zhizhou.zhang@xxxxxxxxxxxxxx>
>
> Adds the device tree support for Spreadtrum Shark64 SoC based on ARMv8 architecture.
>
> Signed-off-by: zhizhou.zhang <zhizhou.zhang@xxxxxxxxxxxxxx>
> Signed-off-by: chunyan.zhang <chunyan.zhang@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/sprd_shark64.dts | 110 ++++++++++++++++++++++++++++++++++
> 1 file changed, 110 insertions(+)
> create mode 100644 arch/arm64/boot/dts/sprd_shark64.dts
>
> diff --git a/arch/arm64/boot/dts/sprd_shark64.dts b/arch/arm64/boot/dts/sprd_shark64.dts
> new file mode 100644
> index 0000000..537cd6d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd_shark64.dts
> @@ -0,0 +1,110 @@
> +/*
> + * dts file for Spreadtrum(sprd) Shark64 SOC
> + *
> + * Copyright (C) 2014, Spreadtrum Communications Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +
> +/dts-v1/;
> +
> +/memreserve/ 0x80000000 0x00010000;
What is this protecting?
Please add a comment.
> +
> +/ {
> + model = "shark64 Board";
> + compatible = "sprd,shark64";
This feels like it would make more sense as an SoC dtsi to be included
by various boards (which can override the model and compatible).
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + chosen {
> + bootargs = "earlycon=serial_sprd,0x70000000";
Can we not use stdout-path for this?
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
Can we have the particular CPU name, please?
> + reg = <0x0 0x0>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0x0 0x8000fff8>;
No PSCI?
What are you using for your bootloader/firmware?
If you must use spin-table, please give each CPU a unique release
address.
> + };
> + cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x0 0x1>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0x0 0x8000fff8>;
> + };
> + cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x0 0x2>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0x0 0x8000fff8>;
> + };
> + cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,armv8";
> + reg = <0x0 0x3>;
> + enable-method = "spin-table";
> + cpu-release-addr = <0x0 0x8000fff8>;
> + };
> + };
> +
> + memory@80000000 {
> + device_type = "memory";
> + reg = <0 0x80000000 0 0x20000000>;
> + };
> +
> + aliases {
> + serial0 = &uart0;
> + serial1 = &uart1;
> + };
Could you move this up above chosen, please?
> +
> + gic: interrupt-controller@12001000 {
> + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0 0x12001000 0 0x1000>,
> + <0 0x12002000 0 0x1000>;
No GICH or GICV?
Which exception level do your CPUs boot in?
I would strongly recommend booting at EL2. That gives the kernel more
flexibility to perform fixups (e.g. zeroing CNTVOFF), and requires less
work in your bootloader.
> + };
> +
> + intc:interrupt-controller@71400000 {
> + compatible = "sprd,intc";
> + #interrupt-cells = <0>;
> + interrupt-controller;
> + reg = <0 0x71400000 0 0x1000>,
> + <0 0x71500000 0 0x1000>,
> + <0 0x71600000 0 0x1000>,
> + <0 0x71700000 0 0x1000>;
> + };
This binding doesn't exist in mainline, and isn't added by this series.
I'm especially confused by the #interrupt-cells = <0>.
What exactly is this, and how do you intend to use it?
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <1 13 0xff01>,
> + <1 14 0xff01>,
> + <1 11 0xff01>,
> + <1 10 0xff01>;
> + clock-frequency = <26000000>;
Please have your FW or bootloader program CNTFRQ_EL1 on each CPU, and
get rid of the clock-frequency property here.
> + };
> +
> + uart0: uart@70000000 {
> + compatible = "sprd,serial";
> + reg = <0 0x70000000 0 0x100>;
> + interrupts = <0 2 0xf04>;
> + };
No clocks/dmas/etc necessary?
Mark.
> +
> + uart1: uart@70100000 {
> + compatible = "sprd,serial";
> + reg = <0 0x70100000 0 0x100>;
> + interrupts = <0 3 0xf04>;
> + };
> +};
> --
> 1.7.9.5
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
