From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> This set contains a few small improvements for the imx8mm-kontron devicetrees (patch 1 to 4) and support for a new SoM (patch 5-6, including baseboard) that complies to the Open Standard Module (OSM) 1.0 hardware specification, size S (https://sget.org/standards/osm). Frieder Schrempf (6): arm64: dts: imx8mm-kontron: Adjust board and SoM model strings arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card IO voltage arm64: dts: imx8mm-kontron: Remove low DDRC operating point arm64: dts: imx8mm-kontron: Use upper case PMIC regulator names arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board .../devicetree/bindings/arm/fsl.yaml | 6 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx8mm-kontron-n801x-s.dts | 5 +- .../freescale/imx8mm-kontron-n801x-som.dtsi | 30 +- .../dts/freescale/imx8mm-kontron-n802x-s.dts | 377 ++++++++++++++++++ .../freescale/imx8mm-kontron-n802x-som.dtsi | 309 ++++++++++++++ 6 files changed, 709 insertions(+), 19 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n802x-s.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-n802x-som.dtsi -- 2.37.0
