[PATCH v1 3/4] dt-bindings: iio: adc: stmpe: Remove node name requirement

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



STMPE driver does not require a specific node name anymore, only the
compatible is checked, update binding according to this.

Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
---
 Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
index 9049c699152f..333744a2159c 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
@@ -13,8 +13,7 @@ description:
   This ADC forms part of an ST microelectronics STMPE multifunction device .
   The ADC is shared with the STMPE touchscreen. As a result some ADC related
   settings are specified in the parent node.
-  The node name myst be stmpe_adc and should be a child node of the stmpe node
-  to which it belongs.
+  The node should be a child node of the stmpe node to which it belongs.
 
 properties:
   compatible:
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux