On 10/07/2022 12:21, Tomer Maimon wrote: > Added device tree binding documentation for Nuvoton Arbel BMC NPCM8XX > pinmux and GPIO controller. > > Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx> > --- > .../pinctrl/nuvoton,npcm845-pinctrl.yaml | 205 ++++++++++++++++++ > 1 file changed, 205 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml > new file mode 100644 > index 000000000000..6395ef2bf5b3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml > @@ -0,0 +1,205 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/nuvoton,npcm845-pinctrl.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Nuvoton NPCM845 Pin Controller and GPIO > + > +maintainers: > + - Tomer Maimon <tmaimon77@xxxxxxxxx> > + > +description: > + The Nuvoton BMC NPCM8XX Pin Controller multi-function routed through > + the multiplexing block, Each pin supports GPIO functionality (GPIOx) > + and multiple functions that directly connect the pin to different > + hardware blocks. > + > +properties: > + compatible: > + const: nuvoton,npcm845-pinctrl > + > + ranges: > + maxItems: 1 ranges without reg? Does it even work? Did you test the bindings? > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 1 > + > +patternProperties: > + "^gpio@": > + type: object > + > + description: > + Eight GPIO banks that each contain between 32 GPIOs. > + > + properties: > + No blank line. > + gpio-controller: true > + > + '#gpio-cells': > + const: 2 > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + gpio-ranges: > + maxItems: 1 > + > + required: > + - gpio-controller > + - '#gpio-cells' > + - reg > + - interrupts > + - gpio-ranges > + > + "-pin": > + $ref: pinmux-node.yaml# Shouldn't this be under bank? > + > + properties: > + groups: > + description: > + One or more groups of pins to mux to a certain function > + items: > + enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi, > + smb5b, smb5c, lkgpo0, pspi2, jm1, jm2, smb4den, smb4b, > + smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21, > + smb22, smb23, smb4d, smb14, smb5, smb4, smb3, spi0cs1, > + spi0cs2, spi0cs3, smb3c, smb3b, bmcuart0a, uart1, jtag2, > + bmcuart1, uart2, bmcuart0b, r1err, r1md, r1oen, r2oen, > + rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, fanin4, > + fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, fanin11, > + fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, pwm3, > + r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg1, > + rg1mdio, rg2, ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, > + smb0, smb1, smb2, smb2c, smb2b, smb1c, smb1b, smb8, smb9, > + smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, > + pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, > + serirq, lpcclk, scipme, sci, smb6, smb7, spi1, faninx, r1, > + spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, > + smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, > + smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, > + hgpio4, hgpio5, hgpio6, hgpio7 ] > + > + function: > + description: > + The function that a group of pins is muxed to > + enum: [ iox1, iox2, smb1d, smb2d, lkgpo1, lkgpo2, ioxh, gspi, > + smb5b, smb5c, lkgpo0, pspi2, jm1, jm2, smb4den, smb4b, > + smb4c, smb15, smb16, smb17, smb18, smb19, smb20, smb21, > + smb22, smb23, smb4d, smb14, smb5, smb4, smb3, spi0cs1, > + spi0cs2, spi0cs3, smb3c, smb3b, bmcuart0a, uart1, jtag2, > + bmcuart1, uart2, bmcuart0b, r1err, r1md, r1oen, r2oen, > + rmii3, r3oen, smb3d, fanin0, fanin1, fanin2, fanin3, fanin4, > + fanin5, fanin6, fanin7, fanin8, fanin9, fanin10, fanin11, > + fanin12, fanin13, fanin14, fanin15, pwm0, pwm1, pwm2, pwm3, > + r2, r2err, r2md, r3rxer, ga20kbc, smb5d, lpc, espi, rg1, > + rg1mdio, rg2, ddr, i3c0, i3c1, i3c2, i3c3, i3c4, i3c5, > + smb0, smb1, smb2, smb2c, smb2b, smb1c, smb1b, smb8, smb9, > + smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, > + pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, > + serirq, lpcclk, scipme, sci, smb6, smb7, spi1, faninx, r1, > + spi3, spi3cs1, spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, > + smb0c, smb0den, smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, > + smb13, spix, spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, > + hgpio4, hgpio5, hgpio6, hgpio7 ] > + > + dependencies: > + groups: [ function ] > + function: [ groups ] > + > + additionalProperties: false > + > + "^pin": This is almost the same as previous property. Confusing and I think it does not work. > + $ref: pincfg-node.yaml# > + > + properties: > + pins: > + description: > + A list of pins to configure in certain ways, such as enabling > + debouncing > + > + bias-disable: true > + > + bias-pull-up: true > + > + bias-pull-down: true > + > + input-enable: true > + > + output-low: true > + > + output-high: true > + > + drive-push-pull: true > + > + drive-open-drain: true > + > + input-debounce: > + description: > + Debouncing periods in microseconds, one period per interrupt > + bank found in the controller > + $ref: /schemas/types.yaml#/definitions/uint32-array > + minItems: 1 > + maxItems: 4 > + > + slew-rate: > + description: | > + 0: Low rate > + 1: High rate > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1] > + > + drive-strength: > + enum: [ 0, 1, 2, 4, 8, 12 ] > + > + additionalProperties: false > + > +required: > + - compatible > + - ranges > + - '#address-cells' > + - '#size-cells' Missing allOf with ref to pinctrl.yaml. > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/gpio/gpio.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + pinctrl: pinctrl@f0800000 { > + compatible = "nuvoton,npcm845-pinctrl"; > + ranges = <0x0 0x0 0xf0010000 0x8000>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + gpio0: gpio@f0010000 { > + gpio-controller; > + #gpio-cells = <2>; > + reg = <0x0 0xB0>; > + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; > + gpio-ranges = <&pinctrl 0 0 32>; > + }; > + > + fanin0_pin: fanin0-pin { > + groups = "fanin0"; > + function = "fanin0"; > + }; > + > + pin34_slew: pin34-slew { and how does it pass your checks? Did you test the bindings? Best regards, Krzysztof
