Re: [PATCH v2 1/4] dt-bindings: usb: typec: add bindings for stm32g0 controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/07/2022 14:01, Fabrice Gasnier wrote:
> Add DT schema documentation for the STM32G0 Type-C PD (Power Delivery)
> controller.
> STM32G0 provides an integrated USB Type-C and power delivery interface.
> It can be programmed with a firmware to handle UCSI protocol over I2C
> interface. A GPIO is used as an interrupt line.
> It may be used as a wakeup source, so use optional "wakeup-source" and
> "power-domains" properties to support wakeup.
> 
> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>

Thank you for your patch. There is something to discuss/improve.

> ---
> Changes in v2:
> - Krzysztof's review comments: update commit message, use ports, use
>   unevaluatedProperties: false for usb-connector schema, define maxItems
>   for power-domains, adopt generic node names, remove quotes
> ---
>  .../bindings/usb/st,typec-stm32g0.yaml        | 90 +++++++++++++++++++
>  1 file changed, 90 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
> new file mode 100644
> index 0000000000000..7b3a2c2124e38
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml
> @@ -0,0 +1,90 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/st,typec-stm32g0.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32G0 USB Type-C PD controller
> +
> +description: |
> +  The STM32G0 MCU can be programmed to control Type-C connector(s) through I2C
> +  typically using the UCSI protocol over I2C, with a dedicated alert
> +  (interrupt) pin.
> +
> +maintainers:
> +  - Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: st,stm32g0-typec
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  connector:
> +    type: object
> +    $ref: /schemas/connector/usb-connector.yaml#
> +    unevaluatedProperties: false
> +
> +  firmware-name:
> +    description: |
> +      Should contain the name of the default firmware image
> +      file located on the firmware search path
> +
> +  wakeup-source: true
> +
> +  power-domains:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts

Isn't connector a required property? I would assume the device does not
make much sense to operate without it.

What about firmware-name? Do you expect hardware to work fine without it
(default firmware?)?


Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux