[PATCH v2 3/3] ARM: dts: imx7d: fixed dts for UC-8210/8220 hardware

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



fix compatible string reference to fsl.yaml
change regulator node name
replace underscore to dash
replace node name
remove 'status' attribute from node
add board compatible and model to ixm7d-moxa-uc-8210.dts
rearrange 82XX alphabet order in Makefile

Signed-off-by: Jimmy Chen <jimmy.chen@xxxxxxxx>
---
 arch/arm/boot/dts/Makefile               |  4 +--
 arch/arm/boot/dts/imx7d-moxa-uc-8210.dts | 46 +++++++++++-------------
 arch/arm/boot/dts/imx7d-moxa-uc-8220.dts |  9 +++--
 3 files changed, 29 insertions(+), 30 deletions(-)

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 37db3b60ba43..c9c57626876c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -747,6 +747,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-flex-concentrator-mfg.dtb \
 	imx7d-mba7.dtb \
 	imx7d-meerkat96.dtb \
+	imx7d-moxa-uc-8210.dtb \
+	imx7d-moxa-uc-8220.dtb \
 	imx7d-nitrogen7.dtb \
 	imx7d-pico-dwarf.dtb \
 	imx7d-pico-hobbit.dtb \
@@ -755,8 +757,6 @@ dtb-$(CONFIG_SOC_IMX7D) += \
 	imx7d-remarkable2.dtb \
 	imx7d-sbc-imx7.dtb \
 	imx7d-sdb.dtb \
-	imx7d-moxa-uc-8210.dtb \
-	imx7d-moxa-uc-8220.dtb \
 	imx7d-sdb-reva.dtb \
 	imx7d-sdb-sht11.dtb \
 	imx7d-smegw01.dtb \
diff --git a/arch/arm/boot/dts/imx7d-moxa-uc-8210.dts b/arch/arm/boot/dts/imx7d-moxa-uc-8210.dts
index 9ec62d8b510d..fc5a0c7ff295 100644
--- a/arch/arm/boot/dts/imx7d-moxa-uc-8210.dts
+++ b/arch/arm/boot/dts/imx7d-moxa-uc-8210.dts
@@ -1,5 +1,5 @@
-/* SPDX-License-Identifier: GPL-2.0+ OR MIT
- * Copyright (C) 2022 MOXA Inc. - https://www.moxa.com/
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/* Copyright (C) MOXA Inc. All rights reserved.
  * Authors: TungYu TY Yang <TungyuTY.Yang@xxxxxxxx>
  */
 
@@ -9,7 +9,7 @@
 
 / {
 	model = "Moxa UC-8210";
-	compatible = "moxa,uc-8210", "fsl,imx7d-sdb", "fsl,imx7d";
+	compatible = "moxa,uc-8210", "fsl,imx7d";
 
 	chosen {
 		stdout-path = &uart1;
@@ -56,7 +56,7 @@
 		startup-delay-us = <100>;
 	};
 
-	reg_sd1_vmmc: regulator@5 {
+	reg_sd1_vmmc: regulator-sd1-3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VDD_SD1";
 		regulator-min-microvolt = <3300000>;
@@ -79,58 +79,58 @@
 
 	leds {
 		compatible = "gpio-leds";
-		signal_led_1_1 {
+		signal-led-1-1 {
 			label = "UC8200:YELLOW:SGN1-1";
 			gpios = <&i2cgpio2 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		signal_led_1_2 {
+		signal-led-1-2 {
 			label = "UC8200:YELLOW:SGN1-2";
 			gpios = <&i2cgpio2 5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		signal_led_1_3 {
+		signal-led-1-3 {
 			label = "UC8200:YELLOW:SGN1-3";
 			gpios = <&i2cgpio2 12 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		signal_led_2_1 {
+		signal-led-2-1 {
 			label = "UC8200:YELLOW:SGN2-1";
 			gpios = <&i2cgpio2 13 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		signal_led_2_2 {
+		signal-led-2-2 {
 			label = "UC8200:YELLOW:SGN2-2";
 			gpios = <&i2cgpio2 14 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		signal_led_2_3 {
+		signal-led-2-3 {
 			label = "UC8200:YELLOW:SGN2-3";
 			gpios = <&i2cgpio2 15 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		user_led_1_1 {
+		user-led-1-1 {
 			label = "UC8200:YELLOW:USR";
 			gpios = <&i2cgpio1 9 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
-		user_led_1_2 {
+		user-led-1-2 {
 			label = "UC8200:GREEN:USR";
 			gpios = <&i2cgpio1 10 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 	};
 
-	buttons: push_button {
+	buttons: gpio-keys {
 		compatible = "gpio-keys";
 
-		push_button0 {
+		button {
 			label = "Reset key";
 			gpios = <&gpio5 11 1>;
 			linux,code = <0x100>;
@@ -164,7 +164,7 @@
 	cs-gpios = <&gpio4 19 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	tpm_spi_tis@0{
+	tpm-spi-tis@0 {
 		compatible = "tcg,tpm_tis-spi";
 		reg = <0>;
 		spi-max-frequency = <500000>;
@@ -344,7 +344,6 @@
 	rtc@68 {
 		compatible = "dallas,ds1374";
 		reg = <0x68>;
-		status = "okay";
 	};
 };
 
@@ -395,9 +394,6 @@
 	pinctrl-0 = <&pinctrl_uart5>;
 	assigned-clocks = <&clks IMX7D_UART5_ROOT_SRC>;
 	assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
-	/* for DTE mode, add below change */
-	/* fsl,dte-mode; */
-	/* pinctrl-0 = <&pinctrl_uart5dte>; */
 	status = "okay";
 };
 
@@ -465,7 +461,7 @@
 	status = "okay";
 
 	flash0: mx25l12805d@0 {
-		compatible = "macronix,mx25l12805d";
+		compatible = "mxicy,mx25l12805d", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 		partitions {
@@ -584,7 +580,7 @@
 			>;
 		};
 
-		pinctrl_gpio_keys: gpio_keysgrp {
+		pinctrl_gpio_keys: gpio-keysgrp {
 			fsl,pins = <
 				MX7D_PAD_SD2_RESET_B__GPIO5_IO11	0x59
 				MX7D_PAD_SD2_WP__GPIO5_IO10		0x59
@@ -729,7 +725,7 @@
 			>;
 		};
 
-		pinctrl_usdhc1_100mhz: usdhc1grp_100mhz {
+		pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 			fsl,pins = <
 				MX7D_PAD_SD1_CMD__SD1_CMD		0x5a
 				MX7D_PAD_SD1_CLK__SD1_CLK		0x1a
@@ -771,7 +767,7 @@
 			>;
 		};
 
-		pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
+		pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
 			fsl,pins = <
 				MX7D_PAD_SD2_CMD__SD2_CMD		0x5a
 				MX7D_PAD_SD2_CLK__SD2_CLK		0x1a
@@ -810,7 +806,7 @@
 			>;
 		};
 
-		pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
 			fsl,pins = <
 				MX7D_PAD_SD3_CMD__SD3_CMD		0x5a
 				MX7D_PAD_SD3_CLK__SD3_CLK		0x1a
@@ -863,6 +859,4 @@
 			MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B		0x74
 		>;
 	};
-
-
 };
diff --git a/arch/arm/boot/dts/imx7d-moxa-uc-8220.dts b/arch/arm/boot/dts/imx7d-moxa-uc-8220.dts
index 6a41cd9e13c6..e66accceeb82 100644
--- a/arch/arm/boot/dts/imx7d-moxa-uc-8220.dts
+++ b/arch/arm/boot/dts/imx7d-moxa-uc-8220.dts
@@ -1,11 +1,16 @@
-/* SPDX-License-Identifier: GPL-2.0
- * Copyright (C) 2019 MOXA Inc. - https://www.moxa.com/
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/* Copyright (C) MOXA Inc. All rights reserved.
  * Authors: Fero JD Zhou (周俊達) <FeroJD.Zhou@xxxxxxxx>
  *	    Harry YJ Jhou (周亞諄) <HarryYJ.Jhou@xxxxxxxx>
  */
 
 #include "imx7d-moxa-uc-8210.dts"
 
+/ {
+	model = "Moxa UC-8220";
+	compatible = "moxa,uc-8220", "fsl,imx7d";
+};
+
 &pcie_phy{
 	status = "okay";
 };
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux