Both vdda-1p2-supply and vdda-0p9-supply regulators are controlled
by dp combo phy. Therefore remove them from dp controller.
Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 2 --
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 3 ---
2 files changed, 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index ed800817..3f8996c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -435,8 +435,6 @@ ap_i2c_tpm: &i2c14 {
pinctrl-names = "default";
pinctrl-0 = <&dp_hot_plug_det>;
data-lanes = <0 1>;
- vdda-1p2-supply = <&vdd_a_usbssdp_0_1p2>;
- vdda-0p9-supply = <&vdd_a_usbssdp_0_core>;
};
&mdss_mdp {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
index 4c25ffc..7adf31b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi
@@ -311,9 +311,6 @@
/* NOTE: Not all Qcards have eDP connector stuffed */
&mdss_edp {
- vdda-0p9-supply = <&vdd_a_edp_0_0p9>;
- vdda-1p2-supply = <&vdd_a_edp_0_1p2>;
-
aux-bus {
edp_panel: panel {
compatible = "edp-panel";
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
