On Mon, 11 Jul 2022 at 14:51, Dmitry Baryshkov
<dmitry.baryshkov@xxxxxxxxxx> wrote:
>
> On Mon, 11 Jul 2022 at 14:22, Robert Marko <robimarko@xxxxxxxxx> wrote:
> >
> > Add support for IPQ8074 since it uses the same PLL setup, however it does
> > not require the Alpha PLL to be reconfigured.
> >
> > Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> > ---
> > drivers/clk/qcom/apss-ipq-pll.c | 5 ++++-
> > 1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
> > index bef7899ad0d6..acfb3ec4f142 100644
> > --- a/drivers/clk/qcom/apss-ipq-pll.c
> > +++ b/drivers/clk/qcom/apss-ipq-pll.c
> > @@ -55,6 +55,7 @@ static const struct regmap_config ipq_pll_regmap_config = {
> > static int apss_ipq_pll_probe(struct platform_device *pdev)
> > {
> > struct device *dev = &pdev->dev;
> > + struct device_node *node = dev->of_node;
> > struct regmap *regmap;
> > void __iomem *base;
> > int ret;
> > @@ -67,7 +68,8 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
> > if (IS_ERR(regmap))
> > return PTR_ERR(regmap);
> >
> > - clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
> > + if (of_device_is_compatible(node, "qcom,ipq6018-a53pll"))
> > + clk_alpha_pll_configure(&ipq_pll, regmap, &ipq_pll_config);
>
> I'd suggest having the 8074 config here too. It seems logical to me to
> make sure that the pll is configured correctly.
Hi,
I have reworked the driver to use match data so it can be easily provided,
However, I dont have it as the downstream QCA kernel does not
reconfigure the PLL, unlike IPQ6018.
I can probably read the registers from a running board and provide that?
Regards,
Robert
>
> >
> > ret = devm_clk_register_regmap(dev, &ipq_pll.clkr);
> > if (ret)
> > @@ -79,6 +81,7 @@ static int apss_ipq_pll_probe(struct platform_device *pdev)
> >
> > static const struct of_device_id apss_ipq_pll_match_table[] = {
> > { .compatible = "qcom,ipq6018-a53pll" },
> > + { .compatible = "qcom,ipq8074-a53pll" },
> > { }
> > };
> > MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);
> > --
> > 2.36.1
> >
>
>
> --
> With best wishes
> Dmitry
