On Thu, Jun 30, 2022 at 2:55 PM Hakan Jansson <hakan.jansson@xxxxxxxxxxxx> wrote: > Add device specific data for max baudrate in autobaud mode. This allows the > host to use a baudrate higher than "init speed" when loading FW in autobaud > mode. > > The device specific max baudrate in autobaud mode for CYW55572 is set to > 921600 bps. Devices without device specific max baudrate in autobaud mode > will use init speed as before. If no device specific init speed has been > specified, it will default to the bcm_proto default 115200 bps. > > The increased baud rate improves FW load time. The exact load time will > depend on the specific system and FW being used. As a rough indication, > the FW load time dropped from ~9s @ 115.2kbps to ~1.7s @ 921.6kbps in one > test. > > Signed-off-by: Hakan Jansson <hakan.jansson@xxxxxxxxxxxx> Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Yours, Linus Walleij
