This series introduces an "adapter" driver that allows PWM consumers to control clock outputs with duty-cycle control. Some platforms (e.g. some Qualcomm chipsets) have "General Purpose" clocks that can be muxed to GPIO outputs and used as PWM outputs. Those outputs may be connected to various peripherals such as leds in display backlight or haptic feedback motor driver. To avoid re-implementing every single PWM consumer driver with clk support (like in [1]) and don't put the burden of providing the PWM sources on the clock drivers (as was proposed in [2]), clk based pwm controller driver is introduced. There is an existing driver that provides the opposite function in drivers/clk/clk-pwm.c with a compatible "pwm-clock" so the new driver uses the opposite naming scheme: drivers/pwm/pwm-clk.c and compatible "clk-pwm". Changes in v2: - Fix filename in the DT schema. - Address Uwe's review comments. Changes in v3: - Fix node pattern in the core pwm schema. - Address Uwe's review comments. Changes in v4: - Drop the (incorrect) pwm schema change. - Use generic node name in the dt bindings example. Changes in v5: - Correct required properties. - add missed returns. Changes in v6: - Add missed error cleanup - Adjust limitations comment Changes in v7: - Rename some variables to be in line with common naming Changes in v8: - Document the glitch that happens inbetween multiple clock operations Nikita Travkin (2): dt-bindings: pwm: Document clk based PWM controller pwm: Add clock based PWM output driver .../devicetree/bindings/pwm/clk-pwm.yaml | 46 ++++++ drivers/pwm/Kconfig | 10 ++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-clk.c | 148 ++++++++++++++++++ 4 files changed, 205 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/clk-pwm.yaml create mode 100644 drivers/pwm/pwm-clk.c -- 2.35.3
