[PATCH v3 8/8] serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx>

Before the drivers rs485_config() function is called the serial core
already ensures that only one of both options RTS on send or RTS after send
is set. So remove the concerning sanity check in the driver function to
avoid redundancy.

Signed-off-by: Lino Sanfilippo <l.sanfilippo@xxxxxxxxxx>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
 drivers/tty/serial/8250/8250_lpc18xx.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c
index d6ca0d47e9d5..6dc85aaba5d0 100644
--- a/drivers/tty/serial/8250/8250_lpc18xx.c
+++ b/drivers/tty/serial/8250/8250_lpc18xx.c
@@ -44,12 +44,8 @@ static int lpc18xx_rs485_config(struct uart_port *port, struct ktermios *termios
 		rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_NMMEN |
 				  LPC18XX_UART_RS485CTRL_DCTRL;
 
-		if (rs485->flags & SER_RS485_RTS_ON_SEND) {
+		if (rs485->flags & SER_RS485_RTS_ON_SEND)
 			rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_OINV;
-			rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
-		} else {
-			rs485->flags |= SER_RS485_RTS_AFTER_SEND;
-		}
 	}
 
 	if (rs485->delay_rts_after_send) {
-- 
2.25.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux