Re: [PATCH v7 3/5] ARM: dts: add RK3xxx CPU Thermal data

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Caesar,

On Sun, Sep 28, 2014 at 3:38 AM, Caesar Wang <caesar.wang@xxxxxxxxxxxxxx> wrote:
> This patch changes a dtsi file to contain the thermal data
> on RK3288 and later SoCs. This data will
> enable a thermal shutdown over 125C.
>
> Signed-off-by: Caesar Wang <caesar.wang@xxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/rk3xxx-cpu-thermal.dtsi | 32 +++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
>  create mode 100644 arch/arm/boot/dts/rk3xxx-cpu-thermal.dtsi

I haven't done lots of review of this series, but I did notice that
this file has bad spacing.  It's fairly obvious in your gerrit patch
<https://chromium-review.googlesource.com/#/c/220270/1/arch/arm/boot/dts/rk3xxx-cpu-thermal.dtsi>
because gerrit (by default) shows you "tab" characters...

In general you should use tab for indentation, not spaces.  You seem
to use a mix of the two.

-Doug
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux